The most economical version of the carcass for the greenhouse is its design collected from a metal profile. It is easy to fulfill, durable and durable. The coating for such a frame is a cellular polycarbonate - translucent plastic.
For the construction of the greenhouses we will need:
screwdriver;
construction level;
roulette;
electrolovik;
metal scissors;
metal profile for drywall rack and guide;
self-screws 1.2x16 mm;
polycarbonate (sheet) 600x210 mm.
1
Blackcutty diagrams with its desired size. To avoid overruning materials, we select them, according to the number of whole polycarbonate sheets. We prepare the platform under the greenhouse or fill the concrete foundation.
2
We cut the frame rack in size, according to our scheme.
3
Polycarbonate Cologain to the sheets on the sheets.
4
From the metal profile we collect the carcass of the greenhouse. All of its parts are connected by self-drawing with a screwdriver.
5
Then the sheets of coating are secure on the finished frame. Their fastening on the roof of the greenhouse is performed using a polycarbonate special profile, which inserted sheets of the coated material. The profile itself is attached to the frame. In the front end, the greenhouses can be installed a standard door block, and in the rear end - the vents for ventilation.
As you can see, the assembly is not difficult. You can manage it in one day. Good luck in your work!
Share advice:"How to make a greenhouse from the profile"
0
1564
