Ventilation in the battery branch serves for the balance of air hood and its inflow relative to the predetermined humidity and steam temperature. This depends on the life of the entire structure. In this article we will tell you how to perform it with your own hands.
1
For work will be necessary:
heater;
ducts internal and external;
fans - 2 pcs;
filters;
work tool.
2
The outflow of polluted air and the delivery of fresh is performed using the supply ventilation. First you need to measure the room and determine for ventilation the diameter of the future hole.
3
In a room of 10 square meters. M of its size in 150 mm will be enough. The opening of the supply ventilation is slightly above the floor surface. And from the outside of the wall, the air duct is mounted with a height of 30-40 cm. The upper part of the product is protected by a canopy or a grid from insects and various garbage.
4
The exhaust hole is performed on the opposite wall of the steam level at the ceiling level. The air duct is mounted indoors and is displayed outwardly above the roof to 50 cm with similar protection of its upper part.
5
Before mounting the air duct in the supply hole, channel fans are installed. They guide the outer air to the caloricer for heating and to filters for cleaning it. In order for the air duct beautifully in the interior of the parchiom, it can be listed with a clapboard.
That's all, good luck to you and pure steam!
Share advice:"How to make ventilation in the steam room"
0
1577
