After the hot dip like hot air into the cool vodichku and refresh the body. Therefore, a good steam room presupposes pool. In order not to spend heavily to create the fun, many people decide to build their own pool. Consider the process of construction.
1
Types of pools. Before embarking on the production of construction, review the types of pools:
Stationary. They are the most durable. Construction of such pools involves the installation of reinforced concrete boxes on the foundation. Design may be placed in the ground, and on it.
Prefabricated. Very convenient in terms of mobility. If necessary, the pool can be easily disassemble and reassemble again. They are less robust than fixed, because for the most part are made of PVC. But the low cost and ease of installation with more than compensate for this deficiency.
Spa pools. They are small because they are intended exclusively for relaxation and hydro-massage. Sold already in finished form (as the previous embodiment).
2
Creating a project. Decide on the size of the pool. Make a decision about how to summarize and water drainage. You can build a structure from scratch or integrate it into an existing sauna. If at this stage you have difficulties, order the project to the pool with the hydraulic circuits and explanations of the installation. Write down the necessary materials for the construction, determine the number and set the exact price. So it looks like the project plan bath with a swimming pool:
3
Excavation. The trench should be greater than all sides of the pool is about 0.5 m, and the depth -. 35-45 cm Bottom do with a small slope for draining tube (diameter 7.10 cm). At this point, guide the tube towards the side of the drainage hole. It should be noted that the drainage pit should be at least 5 m from the pool.
4
Fill form. When everything is done, create a formwork for the bottom, pour sand (4-5 cm), then align it and spress. The same actions do with gravel (10 cm). Then pour the concrete (10 cm), create a grid from the reinforcement and turn the same amount of concrete again. Install the wall formwork, add a "pillow" from sand and gravel, then pave the grid from the reinforcement and concrete the walls. Remember that they must be pouring into one app. Several words of the fill will reduce the strength of the pool several times. While concrete has not grabbed, "voluntary" air bubbles with a vibrating hammer.
5
Plastering. Align the surface and leave the pool for a month, and better for several. Periodically moisturize it, in order to avoid the appearance of cracks. When the design is finally driving, remove the formwork and shuffle the surface with a cement mortar with a thickness of 22-25 mm. If you want the plaster to be durable and more elastic, use waterproof compositions with latex.
6
Waterproofing. You can store the surface of the bowl with a special flooring from the PVV film. A more reliable way is to apply to the outer surface of two layers of waterproofing. From above, it is still necessary to apply a glue mixture with latex.
7
Facing. Consider the most sought-after options:
Tile. Choose for the pool exclusively to porcelain tiles. It does not absorb water and is much stronger ceramic products. Its cost is $ 25-35 per 1 square meter. m.
Mosaic. The best option is products casting from glass. The advantage of mosaic over other types of facing is the large selection of stylistic and color solutions. The price varies from $ 24 to $ 146 per 1 square meter. m.
Film. It is the most economical option and has excellent waterproofing properties. In addition, it is easily clean and is characterized by good resistance to harmful microorganisms. Its cost is $ 10-40 per 1 square meter. m.
Neat fulfillment of all the above items will help you build a high-quality and beautiful pool. You can create excellent conditions for a full rest and recovery of all members of your family!
Share advice:"How to make a swimming pool in a bath"
0
1943
