TP Link is a very popular brand of routers and routers, so it is better to consider its connection on a specific example. To do this, we will take TP-LINK TL-WR841N, work with which will fully illustrate that and how to do almost with any similar device.
Complete set and connection of the TP LINK router
If you buy a router with hands, check the completeness of the configuration, as well as the performance of all parts, just asking the owner to demonstrate it. The standard set includes a router itself, a power supply, a power cable, an instruction book, which will significantly simplify the device and disk with auxiliary files. We connect the "Box" with the TP-LINK marking as follows: connect the power supply with the appropriate connector on the router and the 220 V network, if necessary, using an adapter. WAN wire, which is included, insert into a labeled blue socket, up to a light click. TP-LINK TL-WR841N, used by us, has 4 LAN ports marked with yellow. This means that another 4 computers can be connected to it using the wire (and any number by means of a wireless communication if your model supports such). Our router also has the following indicators and buttons on the housing:
- button to turn on and off the device;
- button that produces a reboot and return to factory settings;
- button for switching on QSS;
- local network communication indicators, Internet, ADSL and others.
How to configure TP-LINK router?
To connect a router and configure, there are not practically no special knowledge or help of a specialist. All the most common issues, including possible errors, are described in detail in the instructions from the kit. If it is not either difficult reading, follow our recommendations.
- It is necessary to hold the button for a few seconds with the RESET inscription to reset to the recommended parameters.
- Next, to go to the web interface of the router, open the browser and enter the number 192.168.0.1 in the address bar. or 192.168.1.1.
- The router will ask you for standard login and password, which is default as Admin and Admin. Later you can change them on the System Tools tab for greater security.
- Data for entering in the "Network" and "WAN" sections are better to take from their contract with a provider or by calling technical support.
- In Mac Clone, click "Clone Mac Address" and confirm with the "Save" button.
- The "Wireless" item is responsible for setting up a wireless network. In Wireless Network Name, you specify the desired name for your Wi Fi, and in Wireless Security -\u003e Psk Password - her password. Sometimes the acting password is indicated on the housing of the router itself.
- Be sure to save the changes and on the "System Tools" tab clamp the reboot button. This will allow changes to enter into force.
Firmware update for TP-LINK router
Each fresh update for the router carries useful opportunities and more convenience in use. You can download the latest firmware for your device on the official website. TP Link.To install it, go to the router through the web interface, in the System Tools tab -\u003e Firmware Upgrade. Using the "Overview" button, select the resulting file and click "Upgrade". We are waiting for the end of the process.
Attention, do not disassemble your router on your own without much need. Damaged seals, stickers and package parts will lead to a warranty on the device.
0
2009
