The Internet has opened people a limitless information space, but still ahead: wireless networks working according to the Wireless Fidelity standard, more known as WiFi, became a real breakthrough. In order to enjoy the benefits of the WiFi telecom operator byfly, you need to purchase a special adapter or a modem with WiFi support and perform the following settings (on the example of the MO-200A MODEMA modem).
1
Connect the modem to a computer or laptop using a cable. In the browser address bar, dial 192.168.1.1, then press ENTER. Next, a window should appear with a login and password request - as a rule, you need to enter the word Admin in both fields. If the computer does not respond and does not request a password, you may need to configure a network connection. This can be done via the control panel: for Windows 7 - in the "Changing Adapter Settings" section of the Network Management Center and Shared Access, and for Windows XP - in the "Network Connections" section. Check the properties of the network connection - in the TCP / IP protocol parameter string (Internet Protocol for Windows 7), the Automatic IP Address is enabled.
2
The next step is to set the modem into the router mode. It is not difficult, you will need to enter multiple parameters according to the instructions and an account to connect to the Internet. So, in the Interface Setup menu, select the Internet section. Further, closely enter the options you need: in the Encapsulation field, activate the PPPOA / PPPOE item for the ISP parameter. Then in the PPPOA / PPPOE field, fill in the UserName and Password graphs - this is just that information that is contained in your contract with the telecommunications operator. Next, set the ACTIVATED value for the Bridge Interface and Yes parameter for Default Route. Check that data is correct and press the SAVE button at the bottom of the screen.
3
Now it remains to configure the WiFi access point. Locate the Interface Setup menu again and select Wireless. To activate the WiFi option, you need to set the ACTIVATED value for the Persd Switch parameter. Think what name and password you want to install for your network, and enter them in the SSID and Pre-Shared Key fields, respectively. Note that the password must consist of the symbols of the Latin alphabet and contain at least 8 characters. In order to use WiFi to be safe, set the WPA-PSK values \u200b\u200bin the Authentication Type and TKIP column in the encryption graph. Press SAVE after making all settings. Now you can use the Internet without connecting the cable within the range of your router.
If during the execution of the settings you made an error or modem settings are not available, try back to the factory parameters - to do this, hold the RESET button on the modem housing for a few seconds, and then perform all steps from the first step.