Connecting a Beeline modem is a process that does not require certain knowledge and skills, therefore, even those who do not consider themselves advanced PC users. To do everything right, follow our instructions.
1
The principle of installation of the modem Beeline is simple: connect the device to a free USB connector in your PC (it must be enabled and loaded), and after 2-3 minutes, the USB modem program starts in automatic mode. You only need to follow the prompts and do not remove the modem from the connector.
2
If the automatic installation of this application does not start, most likely, the autorun is not configured in your Windows. In this case, you will have to run the program manually. To do this, through "My Computer", you open the "Beeline" disk, where you run "autorun.exe" and again follow the prompts. Here, as in the first case, disconnect the computer and the modem is impossible.
3
Now you can go to the network connection process by means of a special application "Beeline Internet at home". It is enough just to find the Modem Beeline icon on the desktop and click on it, and then select the "Connect" in the dropping window. You can then use the browser you selected to enter the Internet.
4
There is a way to connect the modem of this operator and without the Beeline Internet at home application, so to speak directly. In this case, a new Dial-Up connection will be required, in the settings of which you want to enter the following information: short dial number * 99 #, Beeline / Beeline name and password. After that, through the "Device Manager" we find the Beeline modem, right-click "Properties" in it and enter the following data in the initialization string - AT + CGDCont \u003d 1, "IP", "Internet.Beeline.Ru". We save all changes and already through Windows connect to the Internet.
As you can see, the method of connecting the modem Beeline is not limited to one option, therefore, the chances of independently carry it out significantly more.
0
1768
