At the present time, Zipper fasteners are very popular due to its convenience. They can be seen on shoes, clothes, bags and suitcases. But, like all the other, she can also break. What to do in this case: throw out a good thing or search for a workshop where you will be replaced by old zipper new? Do not hurry to do this, the malfunction may be such that it will not be much difficult to cope with it. Let's consider with you some of the faults that can be eliminated by handicrafts without spending a lot of time.
1
When you have a zipper diverge and not fastens, then you need to take the passatology and gently squeeze the runner from behind to decreased the gap in it. If the aluminum runner, then such a procedure can be done only once, and if brass - it turn out to repeat three or four times. Then, if you have no zipper, and brass, put your piece of lightning on a hard framework and slightly catch up with a hammer in her teeth.
2
If the runner does not help or he broke, then buy the same (there is a number from behind) and put on your product. It is easy to put on the jacket at all. The slider simply dresses on top to the part of the zipper on which the bottom of the lock holder is. And if the lightning is bonded from one end clamp, then it must be accelerated and removed. Then wear the slider and put a clip back or just sew a thread.
3
If from zipper, the teeth of which are made from Capron, the slider fell, then you need to take the line, insert into the needle and flash the damaged area. It is necessary to flash with turns, and the turns must be superimposed nearby - one near the other. Such a bandage will not let go of the runner when you fasten the zipper.
4
When lightning broke away from the product itself, it is very convenient to sew it with the needle from the sewing machine. Especially in hard-to-reach places. Put the thread in the needle, make a puncture, on the other hand insert a thread in the loop and pull out the needle back. So stitch stitch and flash the entire damaged seam.
5
Help the kapron lightning when it is not fastened, you can solder flux, namely alcoholic rosin solution. Treat the teeth with a cotton swab with a wet flux, and let me dry a couple of hours. Try so that the solution does not hit the cloth zipper in order to avoid stains. After a certain time, repeat the processing, and the zipper will still serve.
6
When zipper, sewn on clothes (trousers, skirt), constantly unbuttoned, then from threads need to make a loop on the runner's tongue. I fastened with zipper and throw a loop on the button, she will not be unborn. If the tongue broke out from the runner, then instead, insert a small ring or paper clips.
Lightning will not deteriorate if at a certain time it is carried out with her preventive work. Take an unnecessary toothbrush and diligently clean the zipper, and then with a wax or stearic candle, soda teeth. Such periodic lubrication will not extend the runner, and lightning will last much longer.
0
2009
