How to make a pool

Inflatable pools are gaining increasingly popularity and become an integral decoration of numerous country sites. This is a favorite place of recreation of children and adults, allowing to refreshing and relaxing during the heat. The only thing that can overstead the joy of its use is to puncture the wall or bottom, through which the water will flow out. Fortunately, this can be corrected without much difficulty.

First you need to determine the place of puncture. To do this, inflate the pool and listen well - you must hear the hissing sound of the air. Having determined the area from which it proceeds - abundantly moist on with a soap solution, bubbles should begin to form in the place of the puncture. Another way to find a damaged plot is the following - immerse the pool into the water and carefully inspect it. When you see the air bubbles that swapped up - this will be the place of puncture. If the pool is very big and it is not possible to immerse it in the water - pour some water into it and carefully inspect. If the puncture in the bottom - the air bubbles will rise in the same way. Mark the damaged plot with chalk, marker or handle, so as not to lose later.

Having found a place of puncture, you can start repairing. To begin with, remember whether it was complete with a dialing pool for repair. As a rule, they are put on the bottom of the box and consist of ready-made patches, one of the sides of which adhesive base is already applied. If you don't have a repair kit - you can buy it separately, most often they are sold in stores, the range of which is represented by inflatable mattresses, pools and balls.

If you do not have a set for repair and nearby there are no stores in which you can buy it - you will come to the rescue, suitable for gluing rubber surfaces, and a patch cut from an unnecessary rubberized thing. At first, degrease the damaged area using a solvent or alcohol, after which it takes it using the sandpaper. The area of \u200b\u200bthe processed area should be more patch on 20-30%.

Apply glue to the treated surface of the pool and on the patch. Wait a few minutes to activate the glue's vulcanization properties and firmly press them with each other. If the punctures are somewhat - handle them in turn, and not all at once. To obtain the maximum effect, press the latch with something heavy and leave for 24 hours.

There is nothing complicated in the repair of the pool. If you come to this work carefully and without unnecessary fuss - the renovated pool will serve you for more than one year.