How to clean impurities from the water

Man can not live without water for more than three days. Water - is the foundation of our health, but on condition that it is clean. It is worth thinking about the quality of the water we drink. Cleanse it of impurities in our power.

The easiest way - to collect water in a container and let stand for 5 hours. During this period chlorine evaporate from the water, and salt - will settle to the bottom. Thereafter must be carefully drained into the kettle and boil it. The residual chlorine disappears harmful microorganisms die. Salt that could accidentally get under the water overflow from the reservoir into the teapot, will settle on the walls in the form of scale.

A popular method of water purification - the purchase of household filters. Filters Manufacturers Water borrowed technology from the industrial water treatment systems. Household filters are pitcher consisting of two layers and a removable module. The water from the tap is poured into the jug first level it passes through the deep cleaning removable module and the second level misses jug. According to the manufacturer, these filters help to get rid of sand, clay, rust, pesticides, phenols, chlorine and bacteria. Plug-in module must be replaced every three months.

The water filter can be made independently. Perhaps you'll need it in the country or in the campaign. filter is required for the manufacture of activated carbon, gauze, plastic bottle, a tank for clean water, a pair of scissors or a knife. next manufacturing technology. In a plastic bottle cut the bottom. The several layers of cheesecloth and roll shove into the neck of the bottle. Wind coal gauze and placed in a plastic bottle, turning it upside down. Bottle positioned above the tank for clean water. Pour the water into the bottle must be on the side where it was before the bottom. Water will flow through the activated charcoal, slowly seeping through the neck.

Bacteria and harmful substances die not only at high temperatures, but also at low. Therefore, to clean the water from impurities, it can be frozen. For this, the water container is placed in the freezer for 10 hours. After that, the container is removed and disposed at room temperature. When a small piece of ice remains in melt water, it must be obtained and thrown out. In this piece of ice are all harmful substances. The remaining Tala water can be drunk by adding 100 grams of salt to each liter to restore salt balance. It is the opinion that melt water is very good for health and has rejuvenating properties.

Water can be cleaned with silver. Since ancient times, silver is endowed with therapeutic and bactericidal properties. Silver object, and better a spoon, placed in water tank. But before you should make sure that the silver of the highest sample. It is very dangerous to put products from dubious metal into the water. But the silver should not hold for a long time in water, it can be toxic to health.

Silicon has bactericidal properties. Thoroughly washing silicon, it is placed in a glass vessel with water and covered with gauze. It is necessary to keep such water for several days without exposing the direct sunlight. It is important to remember - it is impossible to boil water purified by silicon. Capacity with water must be tightly closed, after silicon is removed from the water. Then the water will be stored for a long time and not to deteriorate.

Taking advantage of any of the methods, you can clean the water from impurities by receiving all the best from the water that it can give for a person. And it can give health, durability and well-being.