Unstoppage fan operation protecting internal laptop functional devices from overheating, improper prevention of contaminants leads unusable design of the laptop cooler. Components of a mobile computer begin to overheat, which leads to a failure of the entire system. The solution of this problem is the replacement of the old fan to the new one.
1
To replace the cooler on a laptop will be required:
two screwdrivers (flat and cross-person);
wet napkin or fabric cut (to remove residues of old thermal paste);
new fan;
thermal paste.
2
All the actions for the analysis of the laptop housing must be carried out when the computer is disconnected from the power supply and disconnect the battery. Carefully read the fastener of the lower part of the body, so as not to damage the integrity of the housing is not unscrewed by the screw. To unscrew the screws, you need to use cross-person screwdriver.
3
Remove the components that interfere with the complete disassembly of the housing: hard disk, memory module, DVD –drive unit. All devices are attached to the loops that need to be disconnected using a long tweezers. To separate the parts of the case, you can use a flat screwdriver or metal blade. It is necessary to act carefully, in order to avoid the appearance of scratches on the case.
4
For Removing the faulty cooler need to disconnect the fan power cable and screws that attached Cooler. The replacement of the fan can only be carried out on a similar model with an identical mounting scheme.
5
Sometimes the replacement of one fan is not enough, it is necessary to replace the radiator. Radiator removal occurs clear A diagram that is numbered near each attachment. To install a new radiator, remove the remains of the old thermophers And apply new to the surface of the processor.
6
After The final assembly of the laptop and turn it on to the operating mode, install the Speedfan program. It is completely free and when setting the parameters of the cooler, will increase the speed of rotation of the fan blades when the equipment temperature will increase.
Checking the temperature of component devices is possible using the Everest program. Not only software developers offer us auxiliary program for checking, overclocking the speed of the laptop fan, designers offer advanced platforms with fans that are connected via the USB port and have a stylish design.
0
7788
