How to apply the thermal chaser for the processor

To understand what the thermal chaser needs, the principle of facilitating the cooler and the processor should be submitted. The processor during operation highlights a large amount of heat. The cooler is designed to cool it. This system works efficiently if the heat is quickly transmitted from the processor to the cooler. The role of a high-quality thermal conductory and performs the thermal paste.

Before applying pastes, you need to remove the cooler from the processor and remove the processor itself from the nest. Be sure to degrease the processor cover, even if the new processor. To do this, you will need cotton sticks and ethyl alcohol from the pharmacy. Wash the head of the stick in alcohol, about the neck of the bubble, press the extra alcohol from the wool and the movements "Shutchok" degrease the upper surface of the processor. This procedure contributes to a high-quality uniform applying the thermal paste.

For applying fresh, thermpars are useful for an attack or a cut finger from the rubber glove. If the thermal paste thickening from long-term storage, you can use plastic or silicone blades (or unnecessary plastic card), but these methods do not give such uniformity and thickness of the layer as if applied with a finger.

We put on the attack on the index finger of the working hand, take a syringe with a thermal stress. We squeeze the thermal spacker on the processor the processor, the size of both two matches, and trying to achieve a thin and evenly applied layer on the entire surface of the processor cover.

If the pasta in view of the denotomy sticks to the attack, we take a plastic card, add a drop of thermal paste to the center of the lid and, pressing the card, smear the thermal path from the center to the edges of the surface. The thermalcase does not fall as it should be for one smear. It is necessary to distribute it monotone, monotonously, the touch of a stroke to distribute it, while trying to avoid hanging excess from the edges of the processor cover.

In order to remove the surplus thermal paste at the edges of the processor, we use a cotton walle dipped in alcohol. With neat stroke movements, remove the surplus.

After completion of the applied, the thermal paste of the processor cover touch the fingers is categorically impossible. We carefully return the processor to the place, fix and install a carefully cleaned cooler on it.

If the processor temperature does not reach the critical mark when it works, it is half a year to change the thermal colon. If the system loads the processor to a temperature of 65-70 degrees, it is worth performing a prophylactic replacement of the thermal paste at least once every two months.