How to clean the fan in the laptop

The laptop fan, which is also called the cooler (from the English. "Cooler" - "cooler"), needs periodic cleaning. The main signals to the cleaning procedure are the increased noise of the fan when the laptop mode is running, as well as an increase in the temperature of the laptop's insides from the fan side, tangible when touched to the enclosure of the laptop computer. If the laptop is still on guarantees, it is better to contact the service center to independently not disturb the seals, if they still decided to clean the cooler on their own, then you need the clarity of actions and knowledge of all the subtleties of the laptop disassembly.

Overheating of the laptop, the noise from the ventilation hole can be evidenced by the breakdown or software failures of the portable computer caused by the installation of unsuitable drivers, for example, as well as signaling the clogging of the laptop fan. To accurately find out the cause of the failure, dismantling the laptop housing in accordance with the attached instruction.

In different models of laptops, the cooler has a different location. For example, some ASUS, MSI models, Sony have easy access to the fan located under a special lid at the bottom of the computer. Cleaning should be done with a needle, brush and compressed air for "blowing" dust.

But for master cleaning the cooling system of the laptop, the cleansing only the fan turbines is not enough. You need to fully disassemble the laptop according to the following scheme:

Dismantle the battery;
Dismantle the posterior laptop panel;
Remove the hard drive;
Remove the optical disk drive (drive);
Disable and pull the keyboard;
Disable the display loops and remove the display itself;
Remove the front laptop panel.

For detailed cleaning of the cooling system, it must be disconnected from the main chip of the laptop. The removal action should pass strictly on the numbering on the fasteners of the cooling system. By such a scheme, remove, according to the same scheme and attach to the place. To improve the cooler, you need to lubricate the axis of the turbine with a special oil or ordinary automotive. To restore the purified cooling system, it is recommended to use a special thermal storage.

For the convenience of long-term use and extension of the laptop, the designers have developed convenient cooling, or rather ventilating, stands that can be used in hot temperature conditions or labor-intensive working processes of a laptop, for example, with bulk games.

The cleaning of the laptop fan must be carried out at least once a year, regardless of the storage conditions of the laptop computer, the operation mode and preventive cleansing of the laptop housing. If you decide to an independent labor-intensive process of cleansing the laptop fan, carefully read the instructions, prepare the necessary tools: a screwdriver, brush, needle, a compressed air source - a hairdryer or a vacuum cleaner at low speed, butter, thermal chaser. Act clear and harmful.