The higher the performance of the laptop, the faster and stronger it will heat up. More than the remaining elements are overheated processor, chipset, hard drive and video card. And since the cooling system in these devices is rather weak, it is necessary to improve it to use the laptop as long as possible.
1
The optimally allowable temperature of the processor and the video card in "home conditions" should be within 40-70 degrees. Sometimes the temperature can reach 100 degrees. In this case, you can talk about the overheating of the Nutubka. This will be evidenced by the hot case, or the device will simply turn off.
2
If you use a laptop year or more, you should make cleaning the cooling system. To do this, you need to disassemble the case, removing the bottom cover, and with the help of a vacuum cleaner, to blow dust with parts of the laptop.
3
For better effect, you will have to replace the thermal paste. To do this, disobey the laptop, get the video card, clean the radiator and chip from the old substance. Apply a thin layer of a new thermal staple on clean surfaces and return all the details in the same sequence.
4
If your actions turned out to be not enough for proper cooling, try replacing the coolers in the computer. Perhaps the solution for you will be new fans with greater power. Just carefully choose new coolers so that the number of contacts coincides.
5
Usually performed operations are enough. If the problem is not solved, moreover, if you are a lover of "heavy" games or programs, then you should purchase a cooling stand. These auxiliary devices blow cold air into the lower part of the computer case, thereby cooling the processor.
There are several tips that allow you to prevent overheating of the laptop. First, do not leave the working laptop on the bed or fabric surfaces, otherwise it will accelerate clogging and overheating. Secondly, do not learn the holes for ventilation while working, try not to put the working laptop on your knees.
In the photo, the thermal colon is applied with a cotton wand, it is categorically not recommended to do so, since the particles of cotton can remain on the thermal paste and lead to fire, which can fail the laptop
This makes no sense. Wool ignition temperature is about 300 degrees, the temperature of the laptop, until it turns off about 100 degrees. You can clean with cotton, you just need to break your eyes and watch the particles do not remain on the chip and around it and that they do not interfere in further heat sliced.
0
7788
In the photo, the thermal colon is applied with a cotton wand, it is categorically not recommended to do so, since the particles of cotton can remain on the thermal paste and lead to fire, which can fail the laptop
in the photo, cotton is removed the old thermal
the essence of the same
What makes it difficult to stay on the thermal paste when removing old?
This makes no sense. Wool ignition temperature is about 300 degrees, the temperature of the laptop, until it turns off about 100 degrees. You can clean with cotton, you just need to break your eyes and watch the particles do not remain on the chip and around it and that they do not interfere in further heat sliced.
It is recommended to remove the old thermal polisher with a grinder type "Bulgarian" with a brushed metal brushing on it.
hahaha or chainsaw wedged on the teeth chain
i filmed a file.