In the spring season and hot summer days, the veranda is a very convenient place to relax. There you can sit with guests or just drink family tea. In warmth, it is simply indispensable, but when it becomes cool, all the convenience of the veranda disappears, because few people want to sit in the cold. Therefore, you need to make every effort and try to warm the room high quality.
1
The best of thermal insulation materials is the insulation from Minvati, foam is also very popular. These materials are relatively inexpensive, and it is not difficult to work with them. In addition, to achieve a larger effect, together with them the foam. It is made of polyethylene foam, which is covered with aluminum foil, the metal part serves to reflect cold air and holding warm.
2
Starting work on thermal insulation veranda specialists are recommended from the floor. The assertion that only the walls and the ceiling is enough - incorrectly. If the floor indoors is boarded, then the first thing you need to high-quality seams and paint the boards. Then we stick to the floor with foam. Shakes of the bands should be skled with a construction scotch. From above of the heat insulator, you can put a carpet coating on felt or linoleum with a polypropylene base.
3
If you decide to warm the walls, then it is necessary to approach it. If the insulation is simply imposed on the walls, the space of the room will significantly decrease. Otherwise, you will have to change the entire internal walls of the walls. When it is planned to put an old finish, then try to remove it carefully so that it has less damage. Then secure the insulation from the Minvati. If it is without an aluminum layer, use the added foam. From above, all close the former trim or better make the MDF panels. They will give the room well-kept, cozy appearance. When you insulate brick walls, it is much more convenient to use foam. On the walls, fasten the foam and on top of Wooden rails. The space between them fill in the insulation. The foam should be cut so that the plates are as defined as much as possible one to one, and there were no gaps. Top to finish the MDF panels.
4
When you warm the ceiling, then you need to start with the mounting of the hydrober. Shakes glider with special scotch. On top of the hydrobrocket, send the rails. Thicks they must be no more insulation thickness. Distance between the planks do not make more eighty centimeters. Insert the prepared sheets of the polyplex, they should be fixed by self-draws with a big hat. Next, put the foam, fixing with a construction stapler. We close it all by block mobile, clapboard or other decorative panels.
5
To avoid big heat loss through the windows, it is better to change them on the glass windasters. If there is no such possibility, then you need to remove them, clean the grooves, apply sealant on them and insert the glass. It is recommended to fix it with new strokes. Under the strokes also apply a sealant. The slots in the frames, if there are, close the construction foam and paint paint. The door can also be the source of heat loss if it is fulfilled. In this case, they put the thermal insulator and are crossed with dermantine.
If you do everything right, in your veranda you will be comfortable to feel even in the cold season!
0
3681
