How to install the sink in the bathroom

If you started repairs in the bathroom or simply decided to replace the washbasin, then the process will not take you trouble, if you correctly approach the question and follow technology. Dismantling and installation can be performed independently, without utilization.

Do not forget to cover the water supply on the main pipe. Start with dismantling. Unscrew the mixer nut, remove the eyeliner, and then dismantle the system. Start disconnecting the siphon, which connects the sink and sewer stock. You can remove the siphon by unscrewing the nut from the back of the bottom of the shell and disconnect from the drain. If you have a comprehensive plumbing replacement, including siphon, then disconnect it from the system, and the sewer hole shut up with a rag or a special cork.

After how you removed the old shell from the brackets, perform finishing works (walls, floor, replacement pipe pipe), if these are provided. Before the subsequent installation must be marked. Measure and spend the horizontal line at an altitude of 80 –90 cm is standard. After flushing the thickness of the rear wall of the washbasin and swipe the second horizontal at the specified distance.

The second line is a markup for fastening brackets. If the new washbasin corresponds to the dimensions of the old, it is likely that the replacement of the brackets will not be required. After fitting the brackets, drill holes in the wall and secure the mounting system. After installing the sink into place, mount according to the selected model. In each product, an instruction is attached with the design features and installation rules.

After how washbasin reliable Fixed, you should conduct a wastewater system. The siphon is represented in the form of a hydraulic shutter, the system of which prevents the entry of unpleasant odor from the sewage. The installation of the siphon is carried out immediately after the installation of the shell. Included with a siphon, a flexible tap pipe is connected, which is a connector in this system.

After Performance of the above steps can start installing the mixer. At the end stage it is necessary to check the quality. Fill the installed washbasin with water and check for tightness - whether the liquid appears in any nodes of the finished system. If the water appears, means, It is necessary to disassemble and reinstall, after driving all the details, and after processing the sealant.

If You have the installation of the shell with a pedestal, then the fastening of the washbasin will be wall-mounted or directly on the pedestal. If the installation is carried out near the wall, in this case It is necessary to place the stand in the planned place and outline on the wall of the attachment point. Drill the holes according to the plan and place the dowel on which the washbasin will be "hanging". Be sure to install rubber gaskets on screws. The installation is connected similar to the previous option.

If you install the sink, built into the cabinet, then it is enough to fix the frame, put the washbasin and connect the system that will be hidden behind the cabinets of the couch.