With the repair of plumbing came to each of us. As a rule, the solution to this problem is carried out in two ways: or we call a specialist and pay for its services, or we carry out the repair yourself. If the shell of shells or supply hoses is a common phenomenon, then the breakdown of the toilet is not as often and for an unprepared person may seem the task not from simple. To avoid this, with reasons, damage and methods for their elimination should be found in advance.
1
To any repair of sanitary equipment should be preceded by overlapping the water to him. It is all done with special cranes. But if you do not have such a crane or you are not sure about its reliability - do not despair. Call the plumbing and ask him to overlap the flow of water to riser. You can also ask him to eliminate the leakage, but it will cost you money, and the result of the work will not always be guaranteed quality.
2
Before repairing the reasons, set the cause and place of leakage. If the water is constantly flowing from the tank into the bowl, then remove the lid of the drain tank and inspect its inside. Remove the lid very carefully and carefully, since this part of the product is made of an easy-haired material and find it to replace will be very problematic. The most common type of breakage is the deformation of a pear closing a drain hole in the tank. This is caused by the natural deformation of the material and is eliminated by its replacement.
3
If there is no possibility to replace the pear, you can try to repair it with the help of pride. The easiest and easiest repairs is to give it the right form. To do this, fill the pear cavity pakrels or burlap until it accepts a spherical shape. If the walls of the pear during its use did not undergo deformation, but it still does not cope with the functions of the retention of water in the tank marked on it - it should be dragged. To do this, a large nut or any other heavy item with a hole in the center is perfect. Dress it on the craving so that he lies tightly to the pear in one edge. Additional mass will increase gravity force and will allow a pear to overlap the drain hole.
4
If the plumbing replacement has been produced for a long time, then the cause of the leakage can be hidden in corrosion formed on a buck of a toilet bowl. For repair, dismantle the drain mechanism (as you can do, you can find out by clicking on of this link) And with the help of sandwich, read the edge of the hole. If the layer of the plated is very large - you can use a knife or a flat screwdriver at the first stage of stripping.
5
If the toach toilet is not inside, but the outside is most likely the reason in the corrugation connecting the bowl with the sewer. Over time, plastic loses its elasticity and cracks, starting to pass the water outward. To eliminate leakage, replace the corrugation. Do not forget to miss the places of its connection with the toilet and sewer sealance. It is advisable to use a special sealant with anti-grab additives, for example, "moment". If you replace the corrugation without dismantling all the toiletza problematic - carefully unscrew the screws that are attached to the floor, and slide the bowl aside. After replacing the item, install the toilet to the former place.
Repair of the leakage of the toilet - is not a difficult thing, but requires great accuracy and attention. If you try, you will cope with the work yourself, if you do not have a desire to mess around with Plumbing - there is always an option to call plumbing to the house.
0
2192
