How to clean the sewer pipe

Most unpleasant household situations can be resolved independently, including the sewage pipe. There are available methods of cleaning, helping in many cases.

1

How to find a seat

To quickly eliminate the blockage of sewage, you need to at least roughly define the cracked pipe. Just check water flow in all drained holes: in the kitchen, in the bathroom, in the toilet. If water is delayed in one plumbing device, it means that the blockage occurred in its discharge. At the initial stage, the siphon is checked. Thanks to the threaded connections, the device is easy to remove and promotion, without forgetting to substitute a basin or lay a rag. Details are washed with hot water by adding detergent. Water leaving with the formation of a funnel speaks of a clean siphon, and it becomes clear that the blockage is further in the pipes.

2

Simple household recipes

When the pipes are not completely clogged and the liquid gradually leaves, folk ways can help:

• Soda - Better than calcined or caustic. The prepared solution of soda (100 g per 1 liter of water) is heated to 80-90 ° and poured into the sink. The resulting alkaline medium dissolves fat deposits.
• Alcohol is naming in the same way, but more actively. It is necessary to pour out 200-300 g of the ammonia solution and close the hole with the rag. After 30 minutes, the pipes are rich enough hot water.
• The household soap is crushed on the grater, dissolved boiling water and poured into small portions with an interval in half an hour. Method long-playing, but enough working.

Alas, folk recipes do not help when blocking pipes by foreign objects.

3

Chemical cleaners

The best effect is given active chemicals manufactured for domestic use. It is not bad to cope with the tiret gel stuck organotic, and the granular "bugs of power" easily removes the dirt in the siphon. The most "caustic" consider Titan tool, fill in the sewer all night. Recommended doses of chemicals do not always cope with the task. The capped in the sink 2-3 caps do not pass on the siphon, and the drugs have to be spent in more quantities.

4

Effective vanatuz

The well-known device helps to free the pipes from the bath, sink or toilet bowl. Cleanups can be as follows:

1. Purify the overflow hole with a rag.
2. Tightly pressed the rubber part, covering the place of the plum.
3. Having made a series of translational movements by VATUZ, sharply tear it from the hole.
4. The action is repeated several times.

Now you can purchase a more modern version of the device - manual pneumatic vehicle.

5

Using a plumbing cable

The blockage in the depths of the pipes are eliminated by means of a flexible shaft. For sewage lines within the apartment, there is enough cable with a length of 2-2.5 m with a gate at the end.

Procedure:

1. Pull out the audit plug or remove the siphon next to the estimated area of \u200b\u200bthe crowding.
2. Send the end of the shaft into the sewer tube.
3. Rotating the cable handle, push the spring rod plump.
4. Put into the blockage, increase the intensity of movements.
5. Remove the garbage, hooking a hook of a plumbing cable, or pushing the plug on.

After removal of the break, is washed with hot water, gradually increasing the pressure.

Periodic maintenance of sewage lines and mesh-filters on washes allow you to crack the pipes less often.