How to clean the bath

Difficult flow of water in the bathroom through a drain hole may be a consequence of clogging that occurred on any pipe of the pipe. This trouble (if it is really a blockage) in no way eliminates by itself, it is possible to get rid of it, only taking advantage of the specialist's own or skill in this area, whose services are not suiced. From our article you will learn how to clear the bath on my own, saving on the call of the master.

A sudden appearance of a slow flow of fluid is characterized. If the water is stagnant and its slow stock in your bathroom - the constant phenomenon, the reason for this is most likely the wrong design and the location (high level) of the drain hole itself.

Chemicals whose assortment is large enough - the very first thing you can resort to to clean the bath. Fill the purchased substance into the drain, allow the time for the appropriate reaction, then remove the hot water flow. Applying such tools accurately follow the instructions attached to them to choose the suitable type of pipes. Do not forget to comply with security techniques.

Vanatuz is a simple device consisting of two parts: a wooden handle and a rubber part (a peculiar piston forming a pressure jump in the pipe system), the diameter of which must be greater than the water drain. The use of the canuza is complicated due to the existing hole in each bathroom intended for overflow of the liquid.

The principle of cleaning the bathroom bathroom is as follows:

Tightly close the plug hole.
Press the vehicle tightly over the drain hole.
Fill the bath with hot water to the top level of the rubber part of the tool.
Perform a few pushing sharp movements up-down to create a hydraulic air blow inside the sewer pipes.
Sharply pull the water from the water, follow the speed of its flow.
If necessary, repeat such actions several times.

Plumbing cable (thick twisted wire) It is advisable to apply when the use of the canuza is not enough. This method is more serious and may require the presence of an assistant.

Use the cable as follows:

Enter the cable into the drain hole.
Turn on the hot water and gradually, rotating the instrument around your axis, push it, alternately making movements back and forth. The assistant at the same time holds a cable in tension, helping to rotate it.
Complete the process of cleaning the bath with the use of Vanuza again.

The final stage of the clearance cleaning will be cleaning the siphon - a small drainage of the pipe, in which, due to its structure, the surplus of garbage accumulates over time. To do this, do such actions:

Unscrew the sump, pre-placing the container or well absorbing fabric under it.
Thoroughly rinse the flask from the accumulated plaque and dirt.
Gently to keep tightness, install everything to your previous place.
Turn on the strong hot water stream and check the result of the work done.

The best way to save nerves and time spent on the elimination of a blockage is prevention. Do not be lazy and follow these steps:

Put a special shallow mesh on the drain hole of the bath, it will serve as an excellent obstacle to getting into garbage.
Periodically pour into the drain of chemicals designed to combat blockages. Use them carefully, to avoid damage to the pipes.