How to clean the scale

Cancer - Beach of civilization, it accumulates on household items interacting with water at different temperatures. The intensity of the formation of scale depends on the quality of water, its rigidity: the more water is saturated with the salts, the more tougher, and the faster it appears. In our article, we will consider ways to make scratch.

The place of formation of solid deposits in ordinary enamelled or metal teapots serves the inner surface of the bottom and walls. This defect leads to the fact that the walls and the bottom of the kettle are overheated, and the heating of water slows down and worsens due to the violation of its contact with the metal surface. Caught is cleaned with a boiling with several proven means, absolutely harmless to health:

run 50 ml of vinegar in 500 ml of water. Boil the resulting solution before the discontinuation of the scale of the walls and the bottom of the dishes.
The carbonated drinks "Coca-Cola", "Sprite", "Peppi" will greatly cope with science.
Boil the kettle, alternating soda solutions with water and citric acid with water (1 tbsp. L. Dry matter on 2 liters).
The cucumber brine (or from the tomato) will perfectly cope with rust and iron salts.

The heating element covered with the time of the scale of scale, in electrochetics and coffee machines often becomes the main cause of the vehicle breakdown due to its overheating due to the violation of the thermal conductivity properties. Using the heat of heat treatment in such a dishes, in our body partially falls out, applying the harm to the entire urine system. Clear the heating element can be in several ways.

Fill the reservoir with a special tool maker, bring it to the boil and leave for 10-12 hours. After thoroughly rinse the device by passing water through the apparatus. For coffee purchase specialized tools manufacturers, the only way you save and protect their equipment.
In electronics using citric acid (1h. L.), Diluting it to 500 ml of water. The resulting solution will boil and then purified device rinse with clean water.

The formation of scale on TENah washing machines significantly degrades the quality of washing, there is wear on all parts of the instrument, increases water consumption, electric energy and detergents (which are not sufficiently dissolved and washed out). To ensure the normal operation of your appliance and to fully use it regularly remove calcification.

For dishwashers use special equipment to be poured into the base of the unit and will start the normal operation cycle.
In washing machines descaler put into the compartment or granular detergents. Such a substance can act citric acid (use it once every six months) or antiscalant. Then turn the machine to idle at the maximum temperature.

The irons scale appears in the hole from which steam comes out when ironing. Clean the appliance from the negative accumulations possible by doing these steps:

submerge only the sole unit to the hot solution of vinegar (it should not be poured into the water container, since its concentration may damage the rubber parts of the device);
pour into clean water tank of the iron, turn the iron on the maximum heating, and clean it several times by passing steam.

To make full use of household appliances in the house and the normal useful life watch over the purity of their surface water quality and to spot and remove form scale.