The synthetic fibers are melted by heat and with time appear on the soleplate fouling. Nagar difficult to slide the iron over the fabric and leaves contamination on the pressed things.
1
At prudent housewives have left a special pencil. It's very easy. Treat pencil heated soleplate. Be careful. Do not lean over the low iron. In contact with the hot sole pencil melts and releases corrosives. On the edge of the table or the ironing board, place a soft cloth and rub the soles of the corner. Repeat the procedure if the contamination remained.
2
Normal iron without Teflon coating is easy to clean fine table salt. On a damp cloth or paper, sprinkle salt. Rub the grated paraffin candles. Iron resulting mixture was hot iron until outsole clear.
3
Rust is removed with a mixture of vinegar and diluted ammonia. When using these tools, an iron or heat.
4
Another method of "cold" cleaning iron - the use of means for the purification and microwave cookers. Moisten with a sponge means a deposit on the iron. It also means pour on film or on a flat plate and put back iron. While there is an iron soak, do some household chores. After 15-20 minutes, wipe the soleplate with a soft sponge.
5
Do not scrape the deposit from iron with sharp metal objects. Scratched the surface starts to become dirty more quickly. Damaged sole spoil the delicate fabric when ironing.
To prevent fouling, wipe the iron after each use. When ironing synthetic and wool fabrics with a moist gauze and do not put the temperature control to maximum heating.
0
2714
