To clear the iron from Nagar and other contaminants, determine the degree of lesion of the canvas. In most cases, it is sufficient to wipe the iron with a damp cloth or ingreate a moisturized dilated fabric at a maximum temperature. If this does not help, there are several other ways using different liquids and solutions. The main thing is to remove water before each cleaning procedure, turn off the steam mode and use only unnecessary pieces of fabric. After cleaning, check everything also on old rags, since the first time it is not always possible to achieve the perfect cleaning effect.
1
Remove the puffed dirt from the molten fabric, try using special tools for cleaning irons. Depending on the type of action, they must be applied directly to the iron or tissue. Throw the fabric with the applied tool on medium temperature mode, without steam. To determine the correct method of use, read the instructions for the means.
2
The easiest option of removal of dirt from the device canvas is to stroke the salt. To do this, pour the sea salt of medium grinding to unnecessary light fabric. Do it better on a ironing board or any other solid and flat surface. Turn on the iron and wait for the maximum heating by turning off the steam function. Then swallow fabric with salt several times before getting a brownish stench salt. You can also make soda, only it will be needed to change to fresh. The soda has a not such a rigid abrasive structure than salt, and will cause less damage to the tender surface of the iron.
3
If you have enough time, and the iron is polluted very much, then mix the salt with vinegar in proportion 1: 1 and heat in a saucepan. Wait until the salt is dissolved, the resulting liquid should not boil. Cool the mixture to the body temperature so as not to burn when working with it. Pulse a piece of unnecessary fabric into the solution and wipe the contamination on the iron, the applied force. It is desirable to use rubber gloves or instead of tissue brushing the surface with a soft brush.
4
When clearing the ironing surface, do not forget about the holes for steam, in which the scale and other dirt often accumulate. To clean these holes, take cotton sticks moistened in vinegar or citric acid solution (a ratio of 1 teaspoon of powder on a half-table of water). If there is a lot of scale, the same solution, only with distilled water, pour into the iron and carefully pair some fabric.
5
The last lightweight way to remove dirt from the sole of the iron is to clean it with a toothpaste or powder. You can find a dental powder on sale in a pharmacy, it costs much cheaper than paste, but more than once it will be useful to you in everyday life. A paste or powder mixed with water, apply a thick layer on the iron. Leave until complete drying and remove the dry cloth. Check the purity of the canvas on a light unnecessary fabric.
You can avoid iron pollution by sticking to the temperature mode of ironing, determine in advance which fabric can melt, do not smooth dirty clothes and use only distilled water to fill - and your iron will last long and clean.
0
2714
