Alas, almost every owner of a private house faces with the problem of the roof of the roof. The cause of such an unpleasant phenomenon can be the banal wear of the roofing material, mechanical damage to the roof, the inefficient operation of the drain, the use of low-quality building materials when erecting the roof and the violation of its installation technology.
1
The flowing roof is fraught not only by the damage of the property and the disruption of the microclimate in the house, but also the appearance of a dangerous black mold on the walls, closing electrical wiring and even the roof collapse, which is why it becomes immediately to start repairing work. To detect a source of leaks, you need to carefully examine the roof and inspect the attic room, check the floor and rafters for the presence of wet and rotting places. Changing the color and texture of roofing material, cracks, chips, mold and rusty stains - all these signs indicate damage to the coating.
2
The leakage of the slate roof most often become the result of the roof wear or physical impact on it. Small slits in asbestos-cement roofing material can be sealing with a sealant or sample with a special bituminous waterproofing ribbon. With significant damage to the defect sheet, it is necessary to put a piece of a new slate with a suitable width of the wave. Places where nails are clogged, it is necessary to be treated with bitumen mastic or roofing sealant.
3
It is possible to start repairing a soft rolled roof. On the swelling sites (so-called "bubbles"), it is necessary to make neat cuts, twist them, dry well, thoroughly embroider from inside mastic and tightly press, returning to the original position. If there are ruptures of the material or cracks, you need to make patchwork of the appropriate size (they are pre-labeled with roofing glue or mastic and impose on top of the defective section).
4
Despite its wear resistance and durability, the roof of the metal tile also sometimes comes to disrepair. Small fine holes formed as a result of any mechanical damage are filled with special roofing sealants or sealed with adhesive tape. Through damage can be eliminated by overlaying them suitable in size of steel patches. If we are talking about significant defects, it is advisable to replace the damaged sheet new.
5
The flowing roof is most often associated with a shift or fragmentation of several coating fragments. In this case, a similar tile is installed on the "spaces" sites, and the old damaged segments are replaced with new ones. Tile tiles with small cracks need to be dismantled, it is pretty rushing on both sides by a bitumen mastic or roofing glue and fix it again on the "native" place.
6
Unfortunately, even small scratches on the smooth painted surface of the metal roof become the cause of corrosion and, accordingly, the flows. Inspected flaws (including small holes) on the sheet root are eliminated as follows: the affected rust plot is thoroughly covered with a metal brush and degreases, after that a hole is sealing, and the soldering place is sealed with any composite material (waterproof putty, sulb smelting or roof sealant) or covered by a pap of larger. With significant damage, the defective sheets of the folding roof should be replaced by new ones.
7
Even in the absence of leaks, regularly inspect the roof. Experts are recommended to conduct a preventive inspection of the roof at least four times a year - practice shows that the initial destructive process is to eliminate much easier and cheaper than repairing a large hole, gap or crack.
Now you know how to easily eliminate the roofs and return comfort to your home.
0
917
