During the construction or major repairs of a residential building, there is always the question of which material is better to use for the roof: slate, professional flooring, metal tile or Ondulin. Some say one thing, others - the other, we recommend that you stop your choice on metal tile. This roofing material is characterized by ease, durability, durability and low cost, in addition, it can be laid on the roof independently.
1
Before using any roofing material, including metal tiles, you will have to prepare a working surface. First, make sure that all the roofs are smooth, if you do not eliminate the irregularities - the roof is possible in the future. After that, proceed to the installation of crates, heat and waterproofing, as well as the roofing material itself.
2
The case is an integral element of the roofing system at home, mounted to the rafters and serves to directly fasten the sheets of metal tiles. For its manufacture, the board with dimensional dimensions at least 10 × 2.5 centimeters is perfect, the counterclaim is better to produce 5 × 5 centimeters from the bar. To secure boards and bars, use nails with a zinc coating with a length of at least 10 cm. The first board is nailed by the level of the front sink of the cornice, the second - parallel to the first at a distance of 30-35 centimeters from it. The rest are attached to the same rule. After the entire doom is mounted - do the installation of skate and windscrews.
3
The next step is the installation of waterproofing. There are two ways to carry out these works:
Laying the material perpendicular to the cornice is carried out after mounting the crate. Material sheets lay on no less than 7-9 centimeters and are attached to tension.
If you plan to lay waterproofing parallel to the eternity - it is necessary to do this after installing the heat-insulating material before installing the crate. Waterproofing is rapidly and recorded with a counterbalaxy.
Waterproofing is placed in order to prevent the wetting of thermal insulation, since in the case of wetting it loses up to 70% of its beneficial properties.
4
After completing all the preparatory work, you can start laying metal tiles. On the bartal roof, the installation of this material should be started from the end, gradually moving forward over the entire width of the skate. If the roof of your home is tent - start working from the highest point. Metal tile mount in such a way that each next sheet overlap the castle of the previous one. The edge of the first laid sheet should be 30-40 centimeters to perform over the roof. The second and subsequent sheets lay the mustache and align so that everyone together they formed a perfectly flat line. To mount the laid material, use special self-tapping screws equipped with sealing gaskets. The metal tile should be allowed through the wave, one sheet of the material is recommended to fix 8 screws. During the installation of this type of roof it is very important to remember that in case of occurrence, the need to cut a sheet of metal tiles in no case cannot be used an abrasive tool. Due to excessive heating, the protective coating will be collapsed, leading to the unsuitability of the entire material. To avoid such consequences, take scissors for metal or electric saw. Scroll be sure to cover with a protective agent.
5
After laying the metal tile, fasten the horse, slopes and drainage gutters - your roof is ready!
Owning the above information, you can independently make a roof from metal tile, which will protect your home from bad weather for many decades.
Share advice:"How to cover the roof of metal tile"
0
1700
