How to build a toilet in a private house

In order to feel in a private house really comfortable, there must be all the conveniences. How to equip a bathroom and toilet, if there were no before, read further.

Determine the place for the future bathroom, better (easier and cheaper) so that it is in that part of the house, which is closer to the drain well. Treat a bathroom plan in advance. You may want to combine the combined bathroom with the toilet and plan to still install the washing machine, even if you have no money for all this, it is more profitable to sum up the appropriate communication at once.

Do not worry if the only free angle for the toilet will be a place next to the kitchen. A solid wall, equipped with sound insulation materials and a hood, will be installed between them, and the entrance to the toilet is better cut with the opposite side from the kitchen. But all these actions are preferably carried out after laying communications and installation of plumbing for convenience when performing these works.

Select the view of the future sewage. The first option is the samotane, the drain in it occurs in a natural way due to the fact that the pipes are under the tilt. No matter what length drain pipes, it is only important that the uniform bias is accurately complied with the entire plot. The bias is designed by specialists and fixed in SNiP. For pipes with a diameter of 40-50 mm, it is 3 °, with a diameter of 80-110 mm - 2 °, this means that the lower point of the pipe should be lowered with respect to the top to 2 cm. The complexity of this option is that if you try to install it at a finished house, without destruction and destruction and may not be significant.

The second sewage option - pressure, waste in it is transported due to the fecal pump. Significantly reduces the amount of work, but it costs a lot. This pump performs the main function in such a way that the waste in pipes can move even from the bottom up to several meters, and horizontally pipe portion can reach tens of meters and this is despite the fact that the pipe diameter can be reduced to 20 * 40 mm. Household fecal pumps look aesthetically, do not occupy a lot of space. There are even toilets with a built-in fecal pump.

Polypropylene pipes inside the house will need polypropylene pipes inside the house, they have high strength and are not capable of deform at a temperature of 95 ° C, they are easy to trim the metal with a metal. Collect plastic sewers will not be difficult: Start from the bottom point, apply the sealant to the edge of the pipe or fitting, then insert the following part into the socket. When installing, try to avoid straight corners in plum, replace them with two bends of 45 °, so the drain flow will not slow down on the bending areas. The drain design is attached by clips or clamps on heels. At the bottom of the risers before turning and at the exit of the drain from the house, install revisions. The compound of the plastic tube with the cast iron must be sealing a special cuff from rubber. If you have chosen the variant with the pump, plum elements are connected by welding or flanges. Pipe laying can be masked in the walls of the wall or under the floor.

The depth of the trench for the outer part of the sewage depends on the climate, it is desirable to consult a specialist in your region. It is possible to reduce it through the use of thermal insulation materials. There are pipes from cement, ceramics, cast iron and special plastic painted in orange color. At the great depth, use pipes of increased strength, possibly corrugated. To accomplish the slope into the trench, fall asleep with a 20-centimeter sand layer and level it accordingly.

Before installing the toilet, check the durability of the floor under it, you may have to take action to make it stronger. If the top of the sewage is higher than the release of the toilet, you will have to raise it on a durable podium. Connecting the toilet to sewage is carried out as follows: in the pipe install the cuff with a sealing ring, then connect with the releasing toilet bowl. If necessary, you can use a plastic eccentric or corrugated cuff. The fecal pump is easily connected in accordance with its accompanying instruction.

If the toilet was successfully docked with the sewer input, make markup on the floor, leave it to the side, drill holes. Put the toilet to place, check if it is worth it, using a level. Take advantage of fixtures that are included with the toilet. The place of the joint with a pipe and cuffs, as well as the base of the toilet process, treat with silicone sealant. Now connect water to the drain tank using a coaxial hose, before which you want to install a crane.

Improvement of a private house toilet increases the quality of accommodation in it. The costs of it are justified and the result. True, for "complete happiness" over time, it is better to install ventilation into the bathroom.