In any toilet there is a lot of things that you want to hide away from the eye - these are numerous pipes, valves, water meters and, of course, sewer riser. It is for this reason that many have a question that all this can be reappeted.
1
During work on disguise, sewer pipes and other plumbing communications, it should be remembered that it is necessary to provide for quick access to them if such a need arises. Consequently, in no case, for this purpose, it is impossible to build a full-fledged wall of concrete or bricks. It is best for a partition from drywall or plastic panels. However, since the dismantling even the most simple wall requires time, before it is built, all pipes should be examined for leaks or damage and in case of detection to eliminate them. After it is done, select one of the existing ways to mask pipes in the toilet:
falsten;
decorative box;
locker;
blinds.
2
Falsten is the most simple, but far from the most practical way to mask pipes in the toilet. Due to the erected partition wall from the floor to the ceiling, the length of your toilet will decrease by 30-50 centimeters, and you will have to heat the toilet ahead, which will significantly reduce the area of \u200b\u200bthe room. To avoid this, you can resort to the construction of an oblique wall representing a design located under an acute angle to two bearing walls. In the case of the use of drywall, chipboard or any other non-moisture-proof material, note that the partition does not touch the tap pipes. If not to do this, the material will constantly absorb condensate, which ultimately will lead to the destruction of the entire structure.
3
If all the pipes and risers in your toilet are located in one corner, they can be hidden using a square box. This design is easiest to build from drywall or plastic panels. If the pipes go along the corners or diverge the book, you can resort to the construction of a multi-level box, each element of which will hide any pipe of the pipe. Installation of such a design is very laborious and requires special attention and collens.
4
If the area of \u200b\u200bthe toilet room is large enough, you can use another way to hide unsightly things - install the locker. Work on its installation is extremely simple and reduced to the creation of a wooden frame that is fixed to the walls, fixing the doors to it and the covering of their moisture-resistant material. In addition to the camouflage function, such a locker can be used and on direct purpose it is convenient to store cleaning products and other economic items. To provide access to valves, pipes and filters under the locker, install a special collapsible screen.
5
Use in the toilet rolls is the most optimal option. Any design of plasterboard, chipboard or plastic panels reduces the space of the already small room. Blinds also occupy the minimum area, hiding everything from the ceiling to the floor. But this is not their main advantage. Raising the canvas up, you will get unhindered access to all hidden communications, as if no wall and was not. And the box, fixed directly under the ceiling, is designed so that it will not be bothering you or cause any inconvenience.
Owning the above information, you can easily choose such a design that will not only hide the water pipes and other communications, but also does not take a lot of space, leaving at your disposal the maximum of the useful area.
0
2010
