One of the main advantages of the hoop doors is compact. Usually they are put in small-sized housing. They are intended for wide openings in which double-minded doors most often can be seen. Doors of this type are made of MDF bands (solid or with glass inserts) or from PVC panels.
1
For installation you will need:
roulette;
hacksaw;
plumb;
bubble level;
perforator (if you have to expand the doorway);
stuslo;
mounting foam;
hammer drill;
building angle;
wooden plasters.
2
Remove the old door (if it was), together with the box, in order not to reduce the useful width of the opening. Next, make measurements, while referring to the lists of the nominal dimensions of the doors. Consider the width of the good. After that, it will become clear: whether it is necessary to further expand the opening or it is worth cutting the dimensions with the help of mounting foam and good slats.
3
Drill on the bottom side of the top panel mounting holes and wind the rail. The receiving latch is placed on the left side of the rail. On the left side of the door on the upper end, take the position of the axis. In the depth of the existing screw, drill a hole in the end. The axis needs to be inserted so that the upper part does not protrude above the end. The lower axis is installed in the same way as the top.
4
In the lower corner of the left we attach the plate plate. When the doors are naked, it can be fired, using the key to regulate the lower height and screws in the plate. Check the location of the guide at the top end on the right side of the door. Drill holes on the fitting diameter of the guide and install it. Behind the door, install the loop. Doors lay so that between them was a distance of 3 mm. Along the doors, apply loops with the same intervals, check the location of the mounting holes, drill holes and secure the loop.
5
Install accessories. It is advisable to build the handle in the center of the right door, this accommodation will be convenient when it is further discovered and closed. Fold the doors and paste the bottom axis in the receiving plate. The upper axis and the guide are inserted into the rail. Steadbing the door, strengthen the top axis in the receiving latch. Door can be used.
Check out the installation instructions and follow the instructions in the desired order, in order to serve you for a long time and securely.
0
1521
