Doors are an integral part of any apartment. They cost a lot, and the price of work on their installation can increase your expenses even more. To avoid this - install the doors on your own. How can this be done quickly and easily - read below.
1
Before installing any door, you must prepare the doorway. On the perimeter of the opening, remove the wallpaper, eliminate all the slots and cracks on the area of \u200b\u200b2-3 centimeters. Door opening should be a little more box. After cleaning the walls, proceed to the installation of the box. It is installed with the outer or inside of the opening, it depends on the direction of opening the door. When working, use the level and plumb. Top and side parts Align the box with a level. If you do not do this, then the door can turn out with the deviations from the "horizon", which will inevitably lead to the appearance of gaps between the box and the web or to the full impossibility of closing them. Depending on the material of the walls, use the appropriate fasteners. If the wall is made of drywall or wood - self-tapping screws with a length of 90-110 millimeters, if the wall of concrete or stone is anchor screws.
2
After completing the installation of the box, proceed to the insert and insert the loops. To do this, measure the place of their location, most often the loops are set at a distance of about 20 centimeters from the upper and lower corner of the box. In the doorway, prepare a small recess with the help of the chisel, exactly the corresponding loop outline. The loop must be completely hiding in the canvas and do not perform on its surface. Also cut the second part of the loop in the doorframe. Attach the door cloth to the box through the hinges using wood screws. The easiest way to do this is to use a screwdriver - it will greatly facilitate your work and speed up the work, if there is no absence - use the usual screwdriver.
3
After fixing the shutter shutter box between the wall and the box. For this, the mounting foam is best suited. This will eliminate the appearance of the gaps in the doorway and give the box to the tighter fixation. To reduce the foam cloth necessary for this, the slots can be laid with wooden trimming or small pebbles.
4
We cut the door frame by platbands around the perimeter. Cashbinds secure with nails with a secret hat or small self-drawing.
5
Install the door handle and locking mechanism. With the help of the chisels and drills in the end of the door canvase, do a hole that a few millimeters should exceed the dimensions of the shut-off mechanism, drill the holes for the handles. Secure the mechanism using self-samples. Insert door handles and lock them.
Following these ordinary tips, you can install the doors in the apartment yourself, which will save a portion of the cash and takes not so much time.
0
1263
