The placement of plumbing devices is the final staging of the bathroom repair. Regardless of which model of the shell was purchased, the principle of its installation and connection will be approximately the same. The most complex option is considered to install the suspended design to the brackets or using studs, which is dedicated to this article.
1
What you need for installation:
Drill perforator;
Drill on concrete and drill for tile;
Brackets (studs) for sink;
Wrenches;
Hammer;
Dowel;
Screwdriver;
Level.
2
We place the place of fastening the sink so that its upper surface is at the level of 80-85 cm from the floor. This can be performed in two ways: just attach a sink to the wall or measure the desired distance with a roulette. In any case, a horizontal plane is checked by the level.
3
We drill holes for fasteners, install dowels or anchor studs - depending on the characteristics of a particular plumbing device. We fix the brackets, mount the mixer on the sink and screw the ends of submarine hoses to it. We hang onto the sink on the mounts - it should fit tightly to the wall.
4
Now we collect a drain siphon, we connect it to the sewer nozzle and a washbasin plum. Connect flexible hoses to plumbing pipes, not forgetting about sealing gaskets. You should not drag nuts too much - rubber parts provide high-quality sealing. It remains to open water, fill the sink and inspect all connections on the absence of leaks, if necessary - tighten the nuts.
Presence Although little experience in similar works provides the opportunity to do without attracting professionals. Detailed guide on the example of the installation of a washbasin with a table is available on video.
0
1399
