Lizun - conquered almost all children and adolescents. Many bloggers relieve rollers about how to make a transparent slider at home and such videos are rapidly gaining popularity. But sometimes, bloggers provide licensun recipes that "do not work." In our article you will find proven recipes of slides that even a schoolboy can do.
Traditional recipe for transparent slide
Silicate glue is considered the best ingredient to create lysus. The finished slim is obtained transparent, it can be inflated using a cocktail tube and just knead in hand.
Required ingredients:
- silicate glue - 100 ml.;
- sodium tetrabrate (acts as a thickener, can be purchased at the pharmacy) - 1 tsp;
- silver glitter;
- wooden spatula.
For the manufacture of slide prepare a deep plate. It is better to use a container, which is not a pity.
- 1 stage - in a plate, pour silicate glue and add the glitter (sequins can be added if desired);
- 2 stages - small doses (2-3 drops) we enter the sodium tetraborate in the mass and begin to thoroughly mix the wooden spatula until the lysun succeeds in the required consistency;
- 3 Stage - Take into the hands of the finished lysun (at first he can pester a little) and start kneading it (if the mass continues to stick, add a bit of thickener).
Ready lysun is obtained transparent so that it does not become gray, play with slot clean hands.
Flaffi Lizun in 5 minutes
If there is no pharmacy thickener in your arsenal, then you are offered an easy way to make a popular anti-stress toy.
Required ingredients:
- silicate glue - 100 ml.;
- shaving foam (preferably to buy without a sharp smell) - a third of the canoe;
- shampoo - 1.5 ch. l.;
- water - 50 ml.;
- soda - 1 tsp;
- wooden spatula;
- paint gouache any color.
The manufacture of the phlastic slide is a very simple and interesting lesson, which will definitely like your child.
- 1 step - to the plate, pour the glue and add paint, start stirring until the glue becomes a saturated color;
- 2 step - to the resulting mass add a shaving foam, we continue to care thoroughly;
- 3 step - the mass should turn out to be air and slightly increase in volume, add shampoo;
- 4 step - if the slot color has changed, add some more paint;
- 5 step - At this stage, the mass must change the consistency and should be similar to lysuine;
- 6 step - in warm water dissolve soda;
- 7 Step - Take Lizun in your hands and start kneading it, adding a few drops of soda water until the slide stops sticking to the hands.
Do not worry that paint will remain in your hands, it completely absorbed and glue. Ready lysun will not be able to paint your pens or clothes.
Simple lysun with the addition of spirits
The slide, prepared on this recipe, will be not only transparent and drum, but also with the enjoyable aroma of perfume.
Required ingredients:
- silicate glue - 100 ml.;
- food dye or paint gouache any color;
- sequins;
- perfumes (preferably with a sprayer);
- wooden spatula.
It is recommended to produce lysun on the street or balcony, as the smells of spirits can float the whole apartment.
- 1 step - pour silicate glue and add a dye, mix thoroughly;
- 2 step - add sequins or a few drops of stationery glue with sequins;
- 3 step - in carefully mixed glue add perfumes (for the first time several "PSHIKS");
- 4 step - the mass should be able to barely visible film, start to interfere with the lysun and continue to add perfumes until the lease will become the necessary consistency;
- 5 Step - Take the slot in your hands and start kneading it.
The finished lysun will stop the smells of spirits for a long time, if stored in the container with a tightly closed lid.
If you have individual intolerance of silicate glue or other additional components, then it is not recommended to do so slot. Do not be discouraged if you did not get lysun from the first time. Perhaps the glue you bought simply did not fit. We advise you to buy the glue of another manufacturer and try again.
0
450
