How to make a flapfy?

In this article, we'll figure it out how to make such a famous bright lysun today, which is called Fluff Smile, which translated from English sounds like "fluffy mucus".

1
Phlaffus with their own hands

I would like to immediately notice that the creation of such a bright and interesting lysuine is not the difficult thing, the main thing at hand to have all the ingredients necessary for this and the desire to create something with their own hands.

It is also worth saying that the creation of such a lysun is interesting, and both an adult and a child. Today, modern children are not departed from computers, and so that the parents to tear it from this occupation to very much, but if you offer to the baby to cook a real lysun with your own hands, it will accurately interest it.

The creation of a phlastic one has a number of advantages:

develop the so-called "Hand Maid"
engage in something interesting your child
save money on the purchase of similar lysus in the online store

When you try to cook this interesting thing, you will not stop you, and you will try to still do something interesting and useful. So let's move on to the direct cooking of the phlaffus.

2
Preparing flap from glue

Recipes under consideration are quite a lot, well, we will look at the most interesting and simple options.

Ingredients that will be needed in the process of creating a flafth:

Borax. It is an excellent whitening means, more abruptly with soda and vinegar solutions. Buy it better in the finished form, so as not to acquire sodium tetrabrate, because Boraks will then come in handy in the farm definitely.
Glass of hot water
Small plastic dishes (Salads fit perfectly)
250 ml of glue (you can use the usual PVA)
Shaving cream (in the recipe only one glass will be required)
4 teaspoons of corn starch
Fruit liquid soap (not mandatory ingredient, but recommended)
Body lotion
Food colorings

Everything is very simple, the main thing to have a detailed and simple instruction for creating this flapfi before your eyes:

The first thing we need is to make a solution from a bore. To do this, we need to pour a tablespoon of Boracs in a glass of hot water and mix it thoroughly to completely dissolve. There may be no more than 40 seconds to this process, and then we assume the glass with Borax aside, for 10 minutes.
Pour glue PVA into a plastic prepared in advance, after which, they squeeze a glass of foam for shaving and all this, according to tradition. We thoroughly stirring (you can use kitchen blade for cake lubrication - very convenient). The resulting mixture is similar to whipped cream.
Add corn starch to the prepared mixture, and gradually, simultaneously stirring again.
The next optional ingredient is liquid soap, it is necessary to add it to the mixture quite a bit (on the eye), several drops from the dispenser will be enough.
There are also squeezing the body lotion (slightly more than liquid soap) - all mix to homogeneous mass.

Now we need to paint our future flap. You can do this both with a single dye, and with the help of several to make the color of Lizun is unusual and bright. Do not need a lot of pouring dye, a couple of drops of each selected color will be enough to paint the lysun.
Move the glass with boric acid to themselves, and slowly (for the beginning there are 4 teaspoons), we begin to pour into our mixture. It is not worth a lot of pouring, because the overly added number of boric acid make a lysun too brittle, and it will not be knit, but to break through pieces.
After four added candy spoons of a boric acid solution, it is carefully and quickly all needed to mix, and see how Lizun gradually begins to slow down from the bowl, further, will be visible by its consistency, whether the boric acid is enough, or needed yet.
After the desired Lizuun consistency has been reached, you need to take it in your hands and it's good to remember everything, from all sides and sides, if elasticity does not suit you, you can add some more body lotion.

Lisun is ready - to the joy of adults and for fun children. This toy is excellent also by the fact that it does not leave traces either on the furniture, nor on the floor, nor on the walls, so that such creation can be called perfect and safe, both for children and for the house.

3
Starch phlastic

As mentioned earlier, the recipes for this sticky toy abound, so that here is another proven recipe for excellent lysuine, to create which it will not be necessary to escape in a pharmacy for boric acid, and all that will be needed for it, will be at home:

warm water
starch
pVA glue
plastic bag
dye

Recipe:

Starch must be diluted with water so that one glass of liquid starch is turned out. The third part of this solution is poured into the package (in this case, the package is an excellent vessel for creating lysuine, because you do not have to wash the dishes).
We drip into the package with starch solution a little dye (any, to your taste) - mix.
We add the next component - PVA glue (do not forget that each time you need to interfere with the mixture for the future lysuine to homogeneous mass - no lumps, etc.). The glue should be about the fourth piece of glass.
Mixing all this, we get a romoc elastic and thick. After that, it is necessary to get lysuine and wait until water is stuck from it, the lysun is ready for operation.

4
Fluphus for baby

Your attention is provided with a safe flap recipe that can be given even a small child. Components that need to achieve the goal:

warm water - 150 ml
hair shampoo - 20 g
flour - on the eye
food dye or finger paint (for child safety)

To create a plastic toy, you need to do the following steps, and alternately, not in a hurry, carefully:

In warm water, we pour shampoo, mix the solution is slow, so that there is no foam too much.
Without ceasing to interfere with the solution, we snatch the flour, gradually, not in a hurry and until the solution turn into an elastic and very soft tough jelly.
While flour rolls, you can add a couple of drops of food dye there, and if you mix several colors at once, it will be very interesting lysun with divorces.
The resulting dough put in the refrigerator for a while, after the flapfy cools, we rinse it with water so that everything is clean on it from the surface. Flaffi slim can be given to a small child without any concerns.

Of course, so as not to spend your time you can purchase such a flap in the store or order on the Internet, but think about what you will not know from what it is made and how safe is. If you think well, then there is nothing better and more pleasant than creating a toy for your child with your own hands, and it will be the best option - to connect your child to this interesting process.