How to make an eraser at home?

Prediciously cooked erases are better than purchased due to the fact that they can be made unique. They can be given the desired form, choose a color or decoration. In addition, erases can be made not only by ordinary, erasing a pencil, but "magic". Eraser of this type will be copred even with serious traces, such as those that leave ink.

1
Rubber eraser

Rubber is most often used to create erases. You can make a pencil or a large full-fledged eraser figure. Shaped rubber is easy to paint and can be satisted. To create an eraser you need:

Security tools: glasses and bathrobe or apron
Uniform tires, not more than 30 ml
40 ml of water
White distilled vinegar - as much as rubber is taken
Talc, can be replaced with flour
10 ml of river sand
Tool for kneading
3 Working capacity

Method of creation

Outflowing goggles and bathrobes. Despite the fact that all materials are non-toxic and can apply the minimum harm to the skin, it is better to protect themselves. In addition, the apron will not allow the clothes to be wrapped, because rubber is hardly overwhelmed.
Take one container, poured into it 30 ml of water and bred in it all the shaped rubber. The main thing to choose a container from such a material so that at this stage it does not enter into a chemical reaction with rubber. Safer than glass or plastic.
Depending on what the future eraser is conceived, the number of components can be reduced or increased. The main thing to maintain a 1: 1 ratio and achieve full mixing of the components.
Take another capacity from glass or plastic with a large volume. Poured into it a vinegar and pour into it the rubber mixture. Again everything is thoroughly mixed. The vinegar is taken exactly as much as water and rubber used before used. As rubber dissolves, the mixture of liquid will become similar to clay.
To improve the quality of the sand eraser is added to it. Need to use sifted through a fine sieve, so that it no foreign objects. If no sand, it is easy to replace table salt.
While rubber clay-like mass is not frozen, it can be painted, and to give it the shape of the fingers, which would be desirable. The material does not limes in hand, they are dipped in talc. If not, you can use flour. You can also use the molds and other tools for modeling. Importantly do not forget to sprinkle them with talcum powder.
Finally, take the third container and fill it with water up to half. Ready eraser immersed in it completely and hold for 5 minutes. The plastic tread water bubbles - they must squeeze the hand. When they will no longer be possible to get an eraser and dry.
The drying period eraser better not to touch it to happen by itself. It is not necessary to soak it with paper or cloth, simply leave it in the air. It can take several hours.

2
An eraser for erasing the ink

This eraser is particularly appreciated by those who often makes mistakes in the letters while. Eraser feature of this is that he is better than others copes with the task and removes not only the pencil marks. In addition, it is quite easy to set up, and "ingredients" need quite a bit. These include:

Sponge Melamine
something cutting
Water

Process of creation

To create one eraser require quite a bit of melamine sponge. The feature of this material is that it has the texture almost the same degree of abrasion as sandpaper. That is what helps eraser of the same material as qualitatively erase the traces of a pen.
Besides such sponges have a porous structure in which the entire litter clogged. This eliminates the smearing on the paper after the erasure.
If the sponge from the melamine can not be found in household goods store, you can search in the hardware store. Of the same material makes the gasket for sound insulation. In addition, it is sold freely on the Internet.
Used office knife or scissors, to a small portion of the material to cut a piece of the desired shape. It should be selected on the basis of that, it is convenient if in the future will hold such an eraser in his hand.
No specific advice at this stage is not present, but usually most convenient to hold in hand block 10 cm, a width of 5 and 1.5 cm thick.
After that, Melamine is slightly wetted. For this, it is used or a warm flow water, or a spacker. The most important thing is to trace so that the eraser is slightly wet, and not completely wet. It is necessary that the interaction of water and melamine increases the purification properties of the eraser and at the same time softened it. Dry melamine can be too tough and color paper.
After that wash the stain. The melamine eraser fights great not only with traces of ink, but also with stains from chalk or markers. In addition, they can "clean" shallow scratches. The melamine can be used on large surfaces, but if they are painted, filled with varnish or it is easy to scratch it better to choose a different cleaning method.