Wanting to stand out in the stream of cars, we dream of tuning. And finally, the fashionable headlights keep in hand, it's small - to connect them just. But how to install the upgrade and do not block the firewood?
1
For the correct installation you need to submember the bumper of the car. In most models, you will need the removal of the central lattice of the radiator. To prevent closures, we turn off the minor terminal of the battery.
2
From the reverse side of the headlight housing, we disconnect the wires. Remove the fastening screws of the headlight itself - from 3 to 6 pieces, depending on the production configuration. We remember the exact order when unscrewed, since the screws may differ slightly in length or width. So we will secure yourself from damage. Give regular optics from the nest.
3
In place in factory, we put alternative optics. The main requirement for it is accurate compliance with the form and size of the predecessor. If suddenly the acquisition varies slightly with standard headlamp, you can cut plastic or make a suitable gasket. Fresh optics bolts, connect the wires socket into the socket. We connect the removed terminal of the battery.
4
If there is a desire, create cilia for alternative optics. To do this, cut out the characteristic shape of a black self-adhesive film, plastic or fiberglass. When choosing a form, make sure that it harmonizes with the style of the radiator lattice.
After installing the optics, check its operation and adjust the light. If everything is done correctly, this evening angelic eyes will delight their owner!
0
1345
