Good sharp scissors make beautiful, clean and accurate cuts. Frequent use of them requires constant sharpening blades. This applies not only to kitchen tools for cutting bones and tendons, but also scissors intended for sewing and domestic needs. Sharpening can quickly perform a specialist who has special software, but it costs money. In addition to the cost, you will have to expect the return of your tool.
There are several ways thanks to which you can easily endure your own scissors at home using household items.
How to make scissors - use grinding bar
The most efficient and traditional method of sharpening scissors is a grinding bar or stone.
They can be bought in a shopping store. Any flat stone from the yard is not suitable for these purposes. If possible, get a sloping surface grit for more accurate sharpening. Drip lubricating oil into sharpened. Disassemble scissors if possible. So it will be easier and more efficiently sharpened. If scissor blades are not separated, open them as wide as possible. Sharpen the cutting tips on each side. Try to accurately keep the blade diagonally to the stone.
Scissors Place away from sharpeners for its safety. Repeat the procedure with another blade. Open and close the scissors several times.
How to put the scissors about the glass
All you need is an empty glass bottle. You can also use any type of bank.
This method will first seem somewhat inconvenient, but soon you will mastered it. Open the scissors as widely as possible around the bottle. In other words, act as if the scissors cut the object into two parts. This will make the blades from the reversal point to the tips. Repeat as needed.
How to make scissors - use foil or sandpaper
Career may seem the method using household aluminum foils or sandpaper.
Pull the foil from the roll and fold in half a few times. Insert the foil to the point of rotation and slowly cut. Repeat as many times as necessary until the knives get smoothness.
How to Cold Scissors - Steel Urinary
The steel urine, which is used to clean the household dishes, can also finely sharpen the scissors. Cut the surface several times, making sure that you use the entire length of the blades. Repeat as needed.
How to put the scissors with a screwdriver
In fact, you repeat the same technique, which is described for glass bottles. Open the scissors blades and insert the metal shaft with a screwdriver at the point of rotation. Close the scissors as if you are going to cut a screwdriver, and then repeat several times.
How to put the scissors - use a cup
Cancel stupid scissors using a conventional cup. Turn it over the bottom and move the blade tool to yourself and from yourself.
The longer you will give your scissors, the sharper they will also serve you longer.