Sewing things with their own hands - it is very convenient, practical and economically beneficial. The fact is that clothes on tailoring is expensive, so those who do this makes it not bad. In this work, it's not so simple, and a lot of skills and details you need to know, and it becomes a bad question in this case - how to refuel Overlock, because without this device does not cost any things. Let's find out the details of this process.
Nuances of working with overlock
It should be noted that overlock and sewing machine are two completely different things, and the refill of threads in this case is also made in different ways. No need to forget that overlocked thread refueling directly affects the qualitative characteristics of the stitch of the marking type, as well as the appearance of various passes and string defects.
Working with Overlock is a very painstaking work and it is necessary to conduct it very carefully, not in a hurry. It should be understood that the appearance of defects in the stitch can cause a pass of only one fastening of the thread during its refueling. Moreover, it is worth noting that this situation is not the worst option. Worst it will be worse if, due to the passing of one fastening, the rolling seam simply will not be created.
It is for this reason that every seamstress and simply an overlock user must know and be able to fill a three-dimensional device, as well as ordinary household overlock. It is also worth noting here that there are differences of refueling different overlocks, so this factor should also be borne in mind.
The process of establishing a coil with thread
In order for the overlock refueling process to be clearer. We will analyze this process on the example of a three-dimensional overlock, which is often used by the seams. And it is necessary to begin with consideration of the main parts of the device under consideration, which includes the following details:
- rack
- platform
- spring
- shpulac
- weakening of the lock screw
Each seamstress is obliged to know that:
- before fixing the thread in Overlock, it is mandatory necessary, as it should be prepared
- do not forget also about such processes as a tap fixation, preparation of the racks for the coil.
- In that case, in the process of working with overlock, cone-type bobbins will be used, in this case it will be necessary to start the springs into the holes that are located on the racks or the installation of special attachments of another type.
- Bobin (or if you use the coil) you need to fix on the rack, because, otherwise, when you turn on overlock and start working, the coil simply can "roll off", thereby confusing all the other threads. Such a situation, with a high probability, can lead to the fact that the threads will turn into, which means that the seam will have to re-engage the refueling of the threads, and it will take a lot of time, so have this fact in mind.
In this case, it is necessary to pay attention to the little things, because they play a crucial role in this process. Overlock is a device that refers to excessively sensitive "aggregates", so it is very careful to work with it.
Let's refuel the thread into a three-line overlock
This process is not so difficult, as in the previous example, but, despite this, it is necessary to ensure that the thread accurately passes between the tension plates.
Sometimes it happens that the thread can get beyond the plate, and, visually, you can even notice this, but in the process of work, the tension of other threads will assemble.
It often happens that the thread from the tensioner pops up, and it is not always possible to see it immediately, which leads to negative consequences.
You should not forget that Overlock should be cleaned regularly, otherwise parts of the threads (so-called products) accumulate between tensioner plates. It is such details that interfere with the process of tightening threads.
In order for the threads not spinning, you need to install coils in a special fastening, which is called nitenastants. Only in this way you can ensure that the thread is not twisted. It should be understood that the normal "behavior" of the thread is the main factor for its stable tension.
The process of refueling the thread into the four-year overlock
If you use a four-dimensional overlock, then the alignment of the threads will negate a little differently. In this case, the optimal option is to use threads on the bobbins of a conical type (such parts are intended exclusively for overlocks).
If you use such threads there is no possibility, then you can, in the extreme case, buy threads on small coils, the main thing is that they are thin and elastic.
It is not recommended to use for these purposes a thread-forty or threads of cotton material.
When you fill the four-line overlock worth paying attention to the tensioners, it is impossible to confuse them without anything.
According to the logic of things, everything is quite simple here - the left tensioner of the thread for a similar needle, right - respectively, for the right needle. As for the tensioners of the loopers, everything is here, but on the contrary. This option most often refers to most types of overlocks, but it is best to look into the instruction, everything will be very clearly written.
If you familiarize yourself with the whole above information, then believe me, you yourself without any problems and can quickly fix your overlock.
0
408
