How do it yourself make a hair gum

The original hair decoration is the gum that are made with their own hands. They beneficially emphasize your hairstyle and allow you to quickly assemble curls in the tail or to heat the braid. Thanks to detailed master classes in this article you will learn how to create beautiful hair decorations.

1
How to make a hair band

New, it is well forgotten old. Fabric gums are becoming increasingly popular. It turns out that they are very simple to sew them, just carefully perform each stage in the instructions.

Prepare such materials:

a blank in the form of a simple gum;
strip of tissue measuring 90 cm. 10 cm;
needle and thread in the tone of the material.

Progress:

Fold the segment of the fabric along, face side inside. Take a gum in hand. Cress the blanks from the inside of the material.

Secure the thread on one of the corners of the strip. Start sewing two opposite cuts, while making small stitches.

Purchase in this way the entire segment of the fabric.

For convenience, wrap the strip of folds along the inside of the gum.

When you fully comprehend the edge of the fabric, fasten the nodes.

Grind the thumb under the material.

Gradually remove the fabric on the front side. At the same time, help yourself with your fingers, but do not dramatically pull the workpiece, since the seam may disperse.

You will have such a basis for gum.

Circuit edges Wrap inside and squeeze the secret seam.

That's all, a rubber for hair from the material is ready!

2
How to make an elastic band of satin ribbon

Another lightweight material for work - ribbons. They have treated edges, which means that the fabric will not disperse on threads.

Prepare:

satin ribbons of different widths;
scissors and thick thread;
button decor;
candle or lighter;
glue pistol;
ordinary gum.

Stages of work:

Cut the widest ribbon along 45 cm long. Make the tape sections under the oblique angle. Now, each next tape cut off 2 cm. In short. All you need to prepare 5 tapes for gum.

Advice. So that the cuts of the tapes are not disassembled, treat them with fire or soldering iron.

Collect ribbons together. Position them as the width decreases. So the widest thing you will be from below, and the narrowest is top. Speakingly notice the middle of the long strip and put the thread.

Advice. If there is no twine in the color of the tape, then use the narrow tape.

Strong tapes. Tightly tie a thread into several nodules.

Turn over the billet to the opposite direction, stretch the thread and tie an elastic band to the central part of the tapes.

Glue the decor on top. Do not use it too large, as it will look inappropriate on hanging ribbons.

3
How to make a rubber band

Volumetric hair bands will be obtained if they are tied from thick threads. To create such an original gum you will need only a hook and yarn.

Make the first loop on the thread. To do this, pull the hook thread in the loop and tighten it.

Type 12 air loops. They will serve as a basis for all mating.

Thread the pigtail from the thread through the gum and connect its ends with a simple column.

Type three air loops, then connect with the main part. Continue to tie the bands with columns. You can choose any other hand-friendly crochet for you.

The first row of work must be performed in a circle. At the same time, the last column tie along with the first.

Reincate like a gum throughout the entire length.

Finish work when before knit until the first row. Tie the edges together, make a nodule and cut the thread.

Such a gum will definitely not be anyone!

4
How to make a hair banding with fluffy wire

If you do not know how to knit or sew, then the next instruction for creating hair gum for you. The basis for the decoration will be a cinema wire. It is often used to decorate bouquets.

Materials: