The question of the correct winding of the fishing line on the spinning coil is very relevant for beginner spinningists. Leskening, bait, coil, rod, but fleeing for help to familiar fishermen, so that they helped to refuel the line - not the best option.
Everything seems to be simple, a simple scheme is attached in the manual to the coil, take and rewind the fishing line, what's the problem? But this approach to fishing threatens to end with unraveling "beard" and self-absorbing loops. So you can avoid similar phenomena, we have prepared this material.
Winding fishing line on spinning coil - laying fishing
The coil is mounted on the first knee of spinning, after which the spool is removed. The main fishing line is running in the spinning rings is attached to the spool. It must be remembered that before installing the spool onto the coil, you should open a frame of a ledge. The fishing line needs to be put in the roller of the ledge. To determine the initial winding profile and the volume of Becking, you can use a spare spool. Becking is made of a thicker fishing line and is necessary for the maximum dense filling spool.
Winding fishing line on spinning coil - use of auxiliary devices
In a bobbin with a fishing line, there is a central hole, so it easily dresses on a handle or pencil. To avoid twisting the fishing line, it should go with the reel spoiling it. With a fixed bobbin, the fishing line should not be unwound with turns. It would not hurt to ask a partner, such as a child, to hold a bobbin with a fishing line on the handle. If the partner did not succeed, it would have to adapt to clamp a handle with a bottle between the knees. You can buy a special device for unwinding the fishing line. With their help, you can adjust the magnitude of the effort of the line on the spool.
Winding fishing line on the spinning coil - the rules of winding
Next, you need to put on gloves or take a rag so as not to burn on the line and do not cut your fingers. One hand of the fishing line is clamped up above the first ring, so you can adjust the strength of the winding of the fishing line (it should be very tight, but without fanatism). At the same time, start to twist with a small speed to twist the coil handle.
Winding fishing line on the spinning coil - the required volume of the fishing line
The amount of scattered fishing line should be such that to the edge of the bunch of spools remained 1-3 mm. In case the fishing lines are not enough, Becking is tied to the fishing line, after which the winding to the required volume continues. Please note the winding of the fishing line to the edges of the Borchik threatens with the waters of the beard loops.
Winding fishing line on spinning coil - main winding
After the winding of the Becking and the fishing line and the desired level, you can proceed to rewind the fishing line with a spare spool to a new one. With an unsuccessful winding profile, it can be adjusted by adding the necessary adjustment washers. If there is no spare spool, then to complete the winding of the fishing line, it will have to rewind it to another coil. Do it is necessary to turn the line. For this fir, you can use a screwdriver, securing bottles on it on the spindle.
Winding fishing line on the spinning coil - consolidation of the clip
After the final winding of the fishing line, its edge is attached to the clips on the side of the spool.
It turns out that there is nothing complicated in the winting of the fishing line on the trimmer. You just need to follow the prompts and gently, technically perform the process of winding the fishing line. Knowing the principles of winding, you can easily cope with the installation of the fishing line on any trimmer model.
0
506
