How to sew a T-shirt?

Sew a T-shirt at home is not so difficult. If you do not have an overclock, but there is a machine on which there is a straight line and a stitching zigzag, then you can quite sew a t-shirt from knitwear. Cotton knitted tissue suitable for T-shirts. Good when it is about five percent of Liker. We offer you a small master - classes by sewing. And several ways to handle the neck of the product.

1
Women's Short Sleeve T-shirt

To sewing a T-shirt, you need to choose a cloth. Take cotton with Elastane. It is necessary, on average, from 0.8 to 1.5 meters. It depends on the size of the model.

You need to cook:

Four bobbins of threads (for overlock)
Scissors for cutting and paper scissors;
Pekal and rules, portno needles;
Silicone tape for the sealing of the shoulder seam so that they do not stretch;
To draw the fabric to you need a chalk or color pencil for fabric;
From sewing equipment. We will use Overlock. Of course, you will not be able to do without an iron.

Operating procedure:

We find the pattern on the Internet, print. Cut and glue. Be sure to learn your measurements with the selected size. If the selected model of T-shirt sleeve is long, you can adjust its length yourself.
When your pattern is ready, pay attention - whether there are batteries on the seam.
Do not want a T-shirt to be attacked? Connect the straight line of the upper and lower point of the side seam. In the opposite case, on the line of the waist, make a smooth recess.
Be sure to check the width of the sleeve, whether it is suitable for you. It can be adjusted.
Check need chest volume and T-shirt length.

Pattern

Now you are confident that the pattern is ideal for you. Start out the cutting of parts.
On the table, spread the knitwear twice, connect the edge of the fabric face inside, exhaust outward. Remember that the backrest and in front of the product are cut with a fold.
Spread the details of the pattern on the fabric. Detail of reference must be placed on a fold. If the fabric size does not allow you to arrange a backrest, it can be seamed in the middle.

Cut out

Place the tissue of the sleeve and neckline of the neck on the fabric. Does your fabric stretches well? Then the wrapper can be painted on the equity thread.
Transfer control signs from paper pattern to fabric. It will be easier for you.
First, outline the details of the transfer and write and cut them out. Then do the same with the sleeves and hint. Cut the t-shirt details. So that the fabric does not shift - you can ride it with tailor pins. Try to cut so that the product does not remain color grinding on the items.
At checkpoints make notches with scissors. They should be very small, about 2mm.
Start work with the joints of the shoulder seam. But not just stitch, insert a silicone tape into the line. For what? In this case, the shoulder seams will always have the right form and not stretch.

Put the detail of the front side up. Put it on it. Facial side of the fabric at the bottom. Align the shoulder seams. In the sewing knitwear with a mixture suture, it is inconvenient, just scrolling the items.
Silicone tape place from the back side. Connect the shoulder seams on overlock. Shoulder seam After the stratification, wrap the detail and start it.
On the working surface, spread the stitched details face up. Take the detail of the sleeve and connect the central notch with the shoulder seam and scroll. Then connect the notches of the arm. Do the same with the second sleeve. Pins scalp the details on Opato Pruraim. Check. The right sleeve should be sewn into the right arm, and not vice versa.

Sleeve

Now on Overlock we connect sleeves with a breakup. Stitch and coach at the same time. We put the details so that the details of the transfer and backs are from above, and the sleeve is below. Why? The allowance you turn on the sleeve, and the front line of the overlock will be top. Suggest the seams.
Fold the product face inside. Connect the side seams and lower cuts of the sleeves, scalp pins and sew. Make it on both sides. When stitching, the detail of the back is on top. Turn the seams with an iron before the product.

Connect the neck to the ring, start the seam. Fold the wrapper in half and start. Now the wrapper is accepted into the neck of the T-shirt. Align with the left brachial seam of the wrap. Equally place the wrapper over the neck.
Put the wrapper on overlock. Facial seams should go on the shelter. In other words, under the paws on top there is a shell. We sew, slowly, this is a rather complicated operation.

You left to strip the bottom of the product and sleeves. It is better to do this on a flat-suture car, if desired by hand.
Well, it's time to try on a T-shirt!

2
How to quickly sew a shirt-t-shirt?

A T-shirt without making patterns can be sewn literally for fifteen minutes. This is a female thing without sleeves, in other words - Summer T-shirt. You will need a small segment of knitted fabric with Lycra. Instead of the pattern, take your shirt that sits on you perfectly. Canya fold into four layers, the front side or outward (does not matter);

T-shirts are famous in half and apply to the fabric;
Now, carefully by the relief of T-shirts cut out. We remember that you need to add to the seams by half a centimeter;
We start collecting a shirt from the shoulder seams. So, knitted fabric is better to make it overlock;
Sew lateral seams;
The neck and bottom of T-shirts are tailored to one centimeter and be asked. Ideally do it on a dispenser machine. With its absence on the usual sewing machine, put a double needle and smash.
Everything. Your Mike - T-shirt is ready!

3
Methods of treating the neck

Edging the main cloth

From the main knitted tissue, cut the strip on the equity thread. If the knitwear stretches well, the oblique beyk is not necessary to paint on the oblique. Blake width chose themselves.

Fold the fabric strip in half and digest the iron.

Basic

Before you start, you need to close one shoulder seam. Beach sew in the open neck. A little stretch the plain during the sewage. Beyk can be added, you can simply select it right away.
Seam Bend inside, on the front side, will decide with the finishing line. I cut off, close the second shoulder seam.

Ready

Rulk processing from the main fabric:

Cut baking width 4 cm. Its size does not need to be counting, the line is then cut off. Fold the strip in half, exhaust inside. Fart with iron.
The left shoulder must be sewn, and the right open. Enter the beque from the front side, align the sections. Slightly pulling the faces of the steep line. Cut the linen part of the Beach.
On the edge of the neck, all three layers of the fabric are cut as close as possible to the seam.
We form a hand. The crawling faces wrap inside around the sections of the fabric. From the face of the neck, we pave careless seam. The line should be under the edge of the beaks.
We sew left shoulder with the roll.

Rull

Edging of the contrasting baker:

Before work, close both shoulder seams.
Measure the size of the neck completely.

Neck

Prepare a contrasting boob in the size of the neck. Sew it in the ring. Fold in half and get out the iron.
Note it to the neck. Return from the edge of the plaintiff 0.7 centimeters and laid the line.