How to use a sewing machine

At first glance, the use of a sewing machine may seem complex and confusing, but it is not. In order for beginners to explore the sewing case, there were no problems from the start, we carefully describe the operation of this device.

1
How does a sewing machine work?

The best way to master the existing model of the device is to find and read the instructions attached to it. If this is not done, even searching the power button can be a problem, as the designers place it in a variety of places. Most often, of course, it is located on the right side of the hull. After the car managed to include:

We are looking for a detail with which we will often have to deal - this is a coil holder. The miniature rod mounted on the top of the typewriter is needed in order to place the coil of the thread.
The next need the nitenastor. As you can guess by the name, it directs a thread from the coil from paragraph 1 to the part that wates it on the bobbin.
On the right side of the coil holder, another small pin is usually located, near which the wheel-oriented wheel is located in the horizontal plane. Her name is Bobin-Motalka. Together with a bobbin, they shake the thread on the reels to use it in the sewing process.
Image buttons will switch the stitches type that makes the machine, as well as their direction (forward or backward).

2
How to use a sewing machine - refuel the thread

Obviously, without this point, it will not work further. Before starting to sew, let's see how to refill thread.

Begin to make a thread from the coil from above, through the nitenastor in the pitch. The latter looks like a lever with cutting grooves. Near it may be noteworthy, showing how to act in what order.
Now we click on the tension regulator, which are similar to a miniature wheel with numbers, usually placed near the pyrecycker. This element controls the tension of the thread, without letting it be confused or blends the needle too much.
Another important detail is a small bobbin with a thread located at the bottom of the car. She serves a thread on the needle to make stitches from the inside. Under the metal platform, on which the foot is lowered, we find the coil limiter and the button for its unhindered liberation. Wash the thread from the coil on the bobbin, using the appropriate machine button. After leave the end of the thread outside to insert into the needle. Now you can fix the bobbin and start practicing.

3
How to use a sewing machine - setting the machine before starting work

In order for the work on the sewing machine to be convenient and secure, these rules should be followed:

the plane on which the device is placed must be smooth, stable, with a suitable height seat;
sewing machine is located so that the needle is on the left side of the seam;
the needle is inserted into the groove only with a flat side, check whether the retention screw is well twisted;
to remember how to refuel the thread correctly, you can use special formulas: "left, down, up, down, in the hook, through the needle" or "coil, nitenastor, foot, needle, as well as all guides along the movement";
usually, for the convenience of sewing, the treated material leaves the left, untreated - right (the order changes for the left-handed);
it is not recommended to pull the fabric, already squeezed by a paw (this can lead to the curvature of parts).