How to smoke jeans

On girls of medium growth and standard construction, the purchased thing sits perfectly. And what to do the rest, who does not have the perfect parameters? Basically, the owner of a small increase is brought to attract just acquired jeans in Atelier, giving money for the work of masters. But few knows that it can be made of jeans independently, even without having a sewing machine.

1
How to Shot Jeans - Measures and Trimming

In order to enhance jeans smoothly and beautifully, you must first measure the length. To do this, we need - soap, ruler, pins or needles, scissors.

Feel jeans and shoes in which you would be constantly worn. If, in addition to shoes with a flat sole, you plan to wear shoes with a heel, allowed to add 1 cm to the length.
Excellent fabric inside the product, grab pins. Consider that the fold line should be at the floor level.
Put the product on a flat surface and align the pants in length and width. To facilitate the tailoring, swallow the excess length of the iron.
With the help of soap and ruler, run the final cut line. Using the ruler, measure the bend on both sides - it should be the same.
For tailor sewing, add 2 cm down and spend another line.
With the help of scissors, cut both pants along the second line.
Remove the product on the wrong side and making a bending to the first feature, proceed manually smooth lines.

2
How to Shot Jeans for a typewriter with the preservation of the factory seam

Pick up the tone jeans a thick thread at number 30 and fill the sewing machine. The denim fabric is very rough, so as not to break the sewing needle, soften the jeans seams - knock on them a book or a hammer. When you sewing help with your hand, the neck neatly, not in a hurry.

Perform the machine line close to the factory seam, as shown in the figure.
Remove the stitched face on the front side and keep another line for a durable fixing layer with an inside.
After sewing, cut the allowance, if it is big, and wash the joint zigzag.

After that, scroll all the seams with an iron. Dead pants should look like on the last image.

3
How to strip jeans manually

When you need to urgently shorten jeans, and the sewing machine was not at hand, do not despair! If you try, then neat manual seam is no different from the machine line. An independent tailoring of denim trousers is carried out by a secret seam.

Perform measurements and pruning denim trousers as described above.
Send a pant to the first line of the seam called "forward needle".
Next, adjust the material for another 1 cm and take a neat "secret seam".

Plug ready job.

4
How to smoke jeans - cut the shabby bottom

If the appearance of your jeans decent and breakdown only the bottom, do not hide pants for home or giving. There is an interesting way to enjoy trousers. To do this, purchase a zipper without a lock, it is sold on a snowmaking.

Measure and cut shabby bottom.
Divide the zipper into 2 parts and attach one half a snake edge to the cropped side of the jeans, then detect the machine seam. Try to perform tailoring, as close as possible to the beginning of the zipper.
After that, remove the seam inside the product and place another line, retreating from the edge of about 1 cm.