Regardless of the style and the composition of the product, you can shorten the dress in a short time without the presence of experience and special equipment. The advice below are especially relevant if you were suddenly invited to a party or another event, and your favorite dress seems old-fashioned. Thanks to our recommendations, you can change the outfit in just 15 minutes, profitable stressing The advantages of the figure.
Furnitura I. instruments
To work you will need:
- nutka in tone fabric;
- tape measure;
- chalk, surge or special water-soluble pencil;
- ruler;
- pins;
- scissors;
- sewing needles for handmade;
- sewing machine and overlock (if possible).
Dress on tape
This method is suitable for outfits from costume or other dense tissue. Tape arrival sT PL.correspondence cut, forming straight smooth edges. Mark the desired length and secure the hemp with a pin. Perform a shallow or wrath mark, draw a line of the pog. Do not forget about the allowance. V dann The case is in order 1 cm. The trouser tape is taped at the top edge on the front side of the dress. Then follow the bending and carry out wet-thermal seam processing. Secure the bottom with a straight line machine line along the wrong or face. Similarly, you can process the bottom of the dresses of oblique baking, if the fabric is thin.
Knitted dress
If your outfit is a dress in the floor, then the bottom of the product can be treated in two ways: first - split Switch, second - overlock Stitching. In the first version of the seam, performs a special machine that is not in every studio. But her You can do at home, spending a little longer.
Split the seam
Measure the length of the product, settling 2.5 cm per battery. Treat cutout on overlock, follow the scattered line and pave the first line along the wrong side of 1 cm from the edge of the product. The second line must be performed on the width of the paws (0.5 –0.7 cm) from the first line. Upon completion, process the product with an iron using a function. escape.
Overlock line
Everything is very simple here. Measure the length of the product, adding 0.5 cm. Cut extra cloth over the planted line and perform overlock The line of the middle width.
Dress on occasion
The bottom slice of the dress can be treated with lace. This method is relevant for elegant products or clothing, where the finish is already present. Source the length and cut the extra cloth on the planned line. Sew the lace in two ways:
- The first: Change the cut on the front side and increment the lace.
- Second: Attach lace on facial fabric and visiting 0.5 –1 See Perform remote By lace, start the seam. Load the finishing line on the front side of the dress 0.1 –0.2 cm.
Dress with skirt plize
It happens that it is necessary to shorten the dress, the bottom of which is embroidered, decorated with lace, embroidery or is a complex technological process. In such situations, shortening occurs for check waist. Step-by-step instruction:
- Determine the length.
- Disarase skirt.
- Measure the former waist girth.
- Perform markup taking into account the transmission on the seam.
- Cut extra fabric.
- Frame a waist skirt circle.
- From the larger indicator, take less.
- The final number is divided into 2.
- The result is the number of centimeters that you need to remove the side seams.
- Level the seams and sew skirt to the top of the dress.
- Take the seam and execute the WTO.
Universal way
Most common The method is a bending and a straight machine line. For this:
- from the intended length, retreat 1.5 –2 cm;
- cut the cloth;
- exercise remote;
- send the edge to the marked line and perform a straight line on the front side of the product on 1 –1.5 cm.
Excusted method
If you do not have the skills of sewing and cut, and you do not have a sewing machine, then take advantage of this way. Determine the length of the dress, as indicated above. From the planted line, leave 2.5 cmx. Perform a double bending, start or sweep the seam. Take the needle and sewing thread of the desired color, then secure the fabric. The hidden seam is performed carefully, upset by the needle the upper threads of two parts of the fabric. Stitches need to make oblique, small size and at the same distance.
Remember: It is very important to visually imagine the whole process (sequence of actions), and then proceed to work. Thus, you can avoid mistakes and properly shorten the dress.
0
1784
