The sequence of action when changing (shortening) the length of the trouser depends on the type of product fabric. Thus, the lingering trousers from light knitted fabrics will be somewhat different from the labeling of classic trousers made of natural or mixed fabrics. In addition, new products made of natural fabrics must be sipped or soaked in hot water. It is done to determine the degree of possible shrinkage of trousers.
1
Work starts with the definition of the desired length of the product on one pant. It is necessary to do it in the same shoes in which it is supposed to wear trousers. It will be better if the desired length dimens someone else. The selected length should look good in different positions of the body. Portnovo pins, shallow or special marker need to put tags.
2
Pants remove and measure the desired length on another pant. Sometimes the subhead line makes a little form, slightly increasing the length of the product from behind. The bottom of the trousers fell, sip the iron, marked stitches.
3
Now it is necessary to draw two lines, referring to the bottom of the product and the place of cut off the extra fabric. The bending allowance should be 4-5 cm. The size of the allowance depends on the tissue density, the thickness of the cloth, the greater should be its bending margin. Also, it is important to consider how the cloth cut will be processed: to bend inward or cooler to the typewriter with a special line (overlock). In the second case, the supply of tissue on the bending may be less.
4
Then the extra part of the tissue along the bottom line is cut off, if necessary, treated with overlock fabrics.
5
When drying trousers made of dense tissues along the subhead line, the trouser is sewed, picking it up in color. Sex braid (two lines) is needed by 1 mm below the marked line so that in the future, the bottom of the bottom of the bottom of the trousers is less worn. That is, as a result, after converting the trouser, the braid must "look" 1 mm. When combining the sides, its edges are better not to convert, but to connect the flashes, pre-quenched the cuts of the bracket by a burning match. It is important to take into account that the brushing braid has a property after washing to give a shrinkage, so before using it, it is necessary or soaked in hot water, or to disappear with a hot iron.
6
Now the trousers can be subjected to (once if the edge of the cut is already treated with overlock) and sunm. Do this in different ways. With adhesive tape (cings). The tape is placed inside the pent and move the iron through the gauze. This method is not durable, since after washing the adhesive tape gradually loses its properties. In addition, the adhesive tape due to its hardness is undesirable to use on knitwear or light tissues. The use of adhesive tape can be combined with the subsequent manual adhesion of the secret seam.
7
You can apply trousers on the machine. This option is suitable for products from dense natural or blended fabrics, such as jeans or sports trousers. The line in this case can act as a decorative element.
8
Most often, pants are laid by a secret seam on a typewriter or hands. In the latter case, some snorkel need to be able to grab a thin needle a few threads of the canvas.
7
The work is finishing with an excipation of the paved product. It is necessary to do this without removing the backbone. Then it needs to be removed and thoroughly pasted the bottom of the trousers.
Obviously, if there is a desire and a small amount of time, anyone can quite easily strip his pants and their households.
0
512
