For some reason, you need to replace zipper on trousers, or you independently sew pants and the next stage is the sewing of lightning, but you do not know which side to approach this case. If you adhere to the work algorithm, it will be easy.
How to sew zipper when sewing trousers
Before starting work, choose the lightning. It can be in the color of manufactured trousers, and may contrast with them. It depends on the selected style and destination of these trousers. If you sew yourself yourself, then to enter a zipper, make a 1 cm in the middle line, and notify or scroll zippers so that its teeth are in tight tissue and did not reach top of 3-4 mm. Half's undercurrent detail. Place the zipper and notify it under zipper.
In the sewing machine, a zipper with the bottom item. Remove pins or base threads.
Replacing the zipper on the other side of Gulfi and detect a typewriter.
Statches and shoot on the scheduled lip of the Gulfik. Work is ready.
How to sew zipper in old pants
If you have to put a zipper into old pants, then the order of work will be a little different, so:
- Onsuate the old snake and remove the threads.
- Sample the new zipper similar to the previous one.
- Note on the old seam of zipper from the side where the piz.
- Stitch on the typewriter strictly by the old seam at a distance of 2 mm from the edge of the fabric. Threads choose close in color to their relatives, otherwise the seams will be very noticeable.
- Distribute zipper and dampen from Gulfi. Sew the zipper and shoot all the seams that were on the gulfik with the front side.
- Remove all pins or threads.
- Sew the belt in places of sipping, smooth all seams with an iron.
Second Lightning
In some cases, it is necessary to sew a secret zipper if zipper on trousers is located on the side or behind. This type of lightning improves the appearance of the product. Before entering the zipper, it is necessary to stack it and rolling the edges, rejuvenate, and so that the incision of the lightning appears as a continuation of the seam.
Operating procedure:
- Remove the pants to the wrongness, open the zipper and attach a braid one of the sides, face to face with a snake. It is important to ensure that the edges of the cloves are in short with an affected edge of the cut. This will allow in a fastened form to completely hide zipper.
- Note it by securing the beginning and end of the line so that the seam does not shut down.
- Repeat the same on the other hand, try not to stretch the fabric under the zipper, otherwise the finished form of the seam will be uneven with the beatings.
- Remove the trousers and zip-lights, rate the appearance of the zipper. If there are irregularities or defects, do not be lazy to remake the job, after stitching, the defects will not go anywhere, but it will be harder to correct.
- Special foot for the sewing machine will take both edges of the zipper. If it is not, do not be discouraged, just watch the seams do not leave from the planted line.
Replace the old, released from standing the lightning is not at all difficult, just as easy to enter it into new pants. The main thing in this matter is accuracy and patience.
1
1949
