How to make a vest from the jacket

Riding things, you discovered an old jacket, which has long lost the former freshness and does not fit into modern wardrobe at all. It is not necessary to desperately throw a thing in the garbage, because spending a little time, you can make an excellent vest. Below is several options for the ideas of reincarnation of the jacket into a stylish and comfortable vest.

1

Instruments

For work, you need the following tools and accessories:

• portnovo scissors;
• threads in tone;
• pins;
• blade or stationery knife;
• decorative elements (beads, stones, rivets, brook, etc.);
• sNIPPER (for trimming threads).

2

Denim vest

First, clean the sleeves. Return 2-4 cm from the edge of the shoulder seam and apply a new product line of the product. It makes no sense to plow the sleeves, since the loop of the loam is needed slightly modified. The edges can be processed on overlock or tinted with tape. In the first embodiment after vectors Make a 1-1.5 cm bending and run a straight line, in the second you will need a skew or braid:

1. Attach the ribbon face to face for the selection of the loam.
2. Perform a 0.5 cm line.
3. Remove the seam and sweep the Kant.
4. Secure seam with a straight machine line.
5. Dip the product with iron and start decor.
6. Stones you can decorate the corners of the collar and reject your shoulders.

3

Bologna vest

Old bologna The jacket can be perfectly served a second time if her reincarnate in a comfortable vest. At the beginning of work, empty the basics and lining sleeves. If necessary - adjust the line of the armor, as in the case of a denim jacket, or a little ear shoulder seams. To do not play for a long time and not to obstruct the fabric for the machine lines, carefully proceed to the armor and enjoy the lining by the secret slash stitches. Only 1 hour - and your wardrobe will replenish a comfortable vest for walking.

4

Vest from leatherette

Jackets from kozhezama There are weaknesses: an axillary zone and pockets. More often, the problem is advently in the axillary zone. And then N. remains Output, how to make a vest from the jacket:

1. To begin with, flashes the sleeves and fold the product along in half. This is necessary for combining the back and shelf.
2. Roll into the lining and scalulate the pins with the base.
3. Apply the seam line, leave the allowance of 0.7 cm, the rest cut.
4. SEVER THE NEED  and remove the product - you need to connect the linings and basers.
5. Align the shoulder and side seams.
6. Extraly with each other kozhezama And lining, then connect the fabric on the sewing machine.
7. In places of rounds, make the insane, not reaching the seam 0.1-0.2 cm.
8. Remove the vest.
9. Remove the Cant on the Weights and launch the finishing line.
10. Fasten the bottom of the lining back.

Working with skin or leatherette, Lubricate the surface of the product with sunflower oil. It will provide good slide, and the fabric will not stick under the paw. Do not forget about wet-thermal processing. Her Need to perform after each sewing process. Be sure to use poetujka (Cotton Cut) To avoid brilliant marks of iron and prophylaxis equipped hole.