How to sew a dress pad

Make a pomp with a dress will help the entry of a fate name, which can be sewed at home with minimal financial costs and sewing skills. So your dresses will look more air and elegant.

1

Required materials for work

For sewing, you will need materials such as:

1. Sewing machine;
2. Scissors;
3. Sewing chalk or cute;
4. Normal or lining fabric - 1 m;
5. Fatin - 4 m, depending on what will be the attitude - lush or standard;
6. Rubber - 1 m;
7. Tape from the atlas - 4 m;
8. Pin or paper clip;
9. Needle with thread;
10. Overlock or overlock foot.

2

Size definition

Before starting work, it is necessary to remove the size and calculate the width of the parts. First, measure the length of the attitude itself, then divide this value into 3 parts, that is, the width of the plated tissue is 1/3 length, and fate 2/3. Also measure the waist girth. Proms write down.

3

Marking line and future seams

The sewing chalk on the fabric is methim the necessary details. The height of the lining tissue should be 1/3 of the length, and the parts width is equal to the waist girth. The height of the part of the fateground is 2/3 of the length of the attitude. To calculate the width of the girth of the waist, multiply by 6, this will be the width of the fireplace that you want to cut.

4

Cut the necessary details

From the fabric and fate, it is necessary to cut such details with scissors:

1. From the lining fabric - 2 details.
2. From the fate - 1 item (depending on the need for a pomp of the product).

If you need a fitness fitness, cut out two more lanes from the fate name, which should be equal to 1/3 of the length of the product as a whole.

5

Sew the details of the fabric

Using a sewing machine, start sewing parts from the fabric. First, stitch the side of the lude is the belt belt, then the bottom, to which you need to subsequently sew fatin. From the top side we capture about 1 cm in order to insert the gum.

6

Sew fatin to fabric

Send the fatin to the tissue with a sewing machine, while you need to make folds from fate to evenly distribute it. By choosing the option of the attitude of the usual, you need to sew one part in the middle of the part of the fabric, and the second to the fatina - in the middle.

7

Stick from the inside

After all the details are sewn to each other, you should sew fatin and fabric from the inside to get a skirt. Overlock process all lines.

8

Insert the gum into the product

Attach the pin to the end of the gum. We produce an elastic band in the tissue belt, where they left 1 cm. Travelings, the ends of the gum should be tied up, and cut off an excess gum. Neatly thread with a needle to sew, so that there is no elastic band.

9

We try out the product

We dress the pad under the dress. If somewhere something sticks out, it is recommended to fix it, cutting off too much.

10

Use the bottom tape

With the help of the seam "Zigzag", the ends of the fate of the fatey below the satin ribbon. So, the product is not focused, it will look neat and shit.

Pottery ready! Now you can give your way easy and pomp, emphasizing the figure. You can make a product more lush with starch.