How to replace the injector to the carburetor

There are two types of transport system power supply: carburetor and still injection. But sometimes the need arises to replace one device to another. To replace the injector to the carburetor, follow further instructions.

Old benzobac disassemble, in its place insert a new one. In addition, install the electric pump. Tank plane Treat anti-corrosion tool.

Apply a pair of holes to make the bracket mount. Be sure to apply the inner thread. Drilling carefully not to flash the block completely. To mount the bracket, make a hole in 20 mm, and for the detonation sensor - 16 mm.

Make disassembly of the radiator and bumper, but before drain all the liquid. After all, the detonation sensor is a conical thread, twist until it stops. Replace the coolant removal nozzle.

Then it is worth replacing the temperature sensor on the plug, in the case when there is no one - install.

And finally, the most difficult is the gasket of the fuel line, which is done along the bottom of the body. It is better to work not yourself, but with someone, especially by performing pushing the return on the steering mechanism.

When you drill a block of cylinders, pay attention to the head of the block, there are no holes there, because the manufacturer can make these holes, and then yours will be superfluous. Be careful.