Wipers or wipers in a car are a consumable part, and sooner or later it requires replacement. Despite the fact that the element is inconspicuous and does not have special aesthetic data, it performs an extremely important function in bad weather. The presence of wipers allows you to control the visibility on the road in the snow and rain. If the element t tit is rebuilding replacements, we propose to independently perform the process, following the phased instruction.
1
The first replacement will follow after several months of active operation. The change of wipers is the same in almost all brands of cars and is so simple that it makes no sense to go to a car repair shop. First of all, determine the degree of wear. To do this, carefully examine the three components of the system: the lower lever of the janitor, the metal blade in the lever and the rubber brush. Most often, the last element requires replacement, since it directly wears out during friction with glass. It is time to change the element if you have noted a deterioration in the quality of cleaning of glass from drops of water and dirt.
2
To you You need to buy interchangeable blades. Take a roulette or measuring tape, measure the length of rubber blades, and when buying new ones, focus on the size of the old ones. When choosing products, do not be surprised if the left and right street cleaner There will be different lengths. Most often, one of them is a few centimeters shorter. New wipers will cost you about $ 10.
3
Raise the metal lever, holding it perpendicular to the glass. Consider the fact that the system is springy, and the janitor can suddenly jump away, breeding windshield. Remove the old one brush. First, carefully study the docking of rubber and metal handle. The connection should be a kind of plastic latch, thanks to which it joins brush. Soft, but confidently press on the clamp and disconnect the old element from the base. Some brushes completed according to a different principle, and instead of a hook are attached to latch.
4
Conducting a replacement brushes, make sure that the lever is as far as possible from the windshield. For safety, cover the glass with a soft towel, bedspread or blanket. Such a precaution will avoid damage, even if the lever bounces and hit the glass. Now you can fasten a new wiper: hoist the new brush To where the old one got and fix the new element to the click.
5
Repeat the process with withabout the second janitor. Follow the size brushes. If on the left janitor a rubber element nt dlinnai, and on the right shorter, thatcho also Install new ones. If a You do not know when to replace, then carefully inspect the wipers: if They became rude, inelastic and covered with cracks, which means that you need to change.
6
If a wipers do not work, but you need to replace the entire system, then open the hood and find black The cap on the front axis of the lever, Put it and remove it. The lever needs to be removed sharply, pulling shallow -sophisticated compounds. When installing a new system back, fasten the levers so that the left part is located six centimeters from the bottom of the windshield. Install the right element in the same way, focusing on the labeling from the bottom of the windshield. Before installing the wipers, return the system engine to place.
Do not forget about safety measures: cover the windshield with a soft blanket. Perform the process sequentially, carefully inspect the principle of connecting each element. Depending on the car models, some points may vary.
0
3350
