How to remove tonovka

The car toning service until recently used most car enthusiasts. Toning helps to hide from prying eyes What is in the cabin minimizes the effects of ultraviolet radiation on the trim, reduces the heating of the cabin. Thus, according to the rules, the lighting light glass light should be at least 75%, and the front side glasses - at least 70%. From July 1, 2012, the authorities tightened the punishment for using tinting inappropriately. And now the driver can lose numbers if it does not eliminate the tint on the spot.

There are several ways to remove tinting. If you have already been stopped and demanded to eliminate tinting - boldly shoot her, going on the edge with the edge with some sharp object. After that, the glass layer will remain on the glass. This layer can be removed by special means selling in auto shops. One of the most versatile and inexpensive means is a PROFOAM 2000 cleaner. You can also use more expensive tool GT 154, etc. From solvents, you can remove the glue with liquid for removing varnish, White spirit, kerosene or gasoline. It is also used for these purposes medical alcohol, a wiper with the ammonia and even simple water with Fairi. Any of these substances is abundantly applied to the film, it softens, and then removed with a blade, a rigid cloth or paper napkins. Be extremely careful and do not allow these drugs to get into the car's trim, it can suffer!

The second way is to remove the tint at once with glue using the heating of the film. To do this, take a construction hairdryer. If there is no one, the usual hairdryer is suitable for drying hair. Heat the film to approximately + 40 ° C (if you are heated more - the film can melt). Next, picker the film from the edge and begin to gradually separate the layer, heating the film along the move. In this case, most likely, most of the glue is separated along with the film. The residues of the composition can be removed in the ways described above. Be careful and at the same way - do not direct the stream of hot air on the elements of the car's clamping, they can melt.

For desperate toning lovers, there was a less costly and time consuming way to tonnow front windows - removable silicone film. This coating is easily installed and is also easily removed from the glass.