In the life of every motorist there are such cases when the car can not start the engine independently. It would be nice in such a situation a new battery or searcate from another car, but if all this is not available - we use the Dedovsky Machine Machine Method from the Pull.
1
It should be noted that this method is able to harm the car. And for machines with automatic transmission, this method is generally contraindicated. You can start the car with the "Tolkach" only if the brakes in your machine are fully working. And you also need assistants - a pair of strong people who want and can push your car. Give the conditional signal in advance to stop.
2
If your car is equipped with a carburetor, then before touched from the place, turn the fuel using the gas pedal. Without enthusiasm, there will be 3-4 pressing. If the injector is installed in your car, you do not need to do this.
3
Insert the key to the ignition lock, we turn it, turn on the neutral gear - at this point we submit a sign to the beginning of the movement.
4
When the car erupts a little and turn up at neutral speed, squeeze the clutch and turn on the second (or third) transmission. After that, slowly release the clutch. It will happen something on the similarity of twitching or push. As a result, the engine must start. But if the acceleration was weak, it is likely that the car will stall, and you have to accelerate again.
5
After the engine started, squeeze the clutch again and, if necessary, slowly slow down. Give a signal to stop the pushing. After stopping the engine is not wasting for another 15-20 minutes, we give a motor the opportunity to warm well.
So that our actions are crowned with success, everything needs to be done quickly, clearly and coordinated! And after the manipulations done, do not forget to recharge the battery, so that then the car does not have to push again.
Share advice:"How to start the car from the pusher"
0
1102
