How to make a car with a pusher

The concept of "car from the pusher" implies the dispersal of the machine with a discharged battery with the help of "live" traction, towing or natural linker. This is not always grateful, but necessary when there are no other options. In this article, we will consider the most accessible methods of "resuscitation" of your iron friend who sooner or later use any driver.

Making sure that the brakes in the car are working, you can proceed to the procedure itself. To begin, it is necessary to find a pair of strong guys who will agree to push the car to the desired overclocking, or another car for towing. Stop sign by agreement with assistants can serve as a hand signal from the car window, a beep or flashing headlights.

When everyone is ready, the driver needs to sit in its place, turn on the ignition to avoid blocking the steering and neutral gear. After the "Pull" command for guys or "Tanya" for a tug can be mounted and start overclocking.

With the beginning of the movement, it is necessary to include the second transmission, without letting the clutch. When the speed reaches 10-15 km / h, it is necessary to go it smoothly, pressing a slightly gas pedal. After a small jerk, the car engine will begin. In the case of a tug, give him a stop signal, otherwise it can forget about you and pull out into another city. Stop your car and, not the gentle motor, thank the helpers.

If the problem with the battery found you on the road having a natural slope, you can start the car engine yourself. This requires to include ignition and neutral transmission. Then, coming out of the car, it should be verified in the absence of a nearby transportation and pedestrians. With an open door from the side of the driver, driving the wheel with his right hand, you need to disperse the car in a slope before the start of its independent movement. Then, on the go, quickly sitting in the chair (the main thing is not to slip!), Should be included the second gear. Cressing the gas pedal, you need to release the clutch - the engine will start. In the slope of your movement control the brakes.

The above methods are applicable only for machines with mechanical KP. And so that such unpleasant situations are not repeated, it is necessary to monitor the charge level and the technical condition of the battery. If he is worn, it is better to change it. If the battery is new, you should check the electrical network of the machine for a possible leakage of energy.