How to enable transmission without clutch

Often, in everyday life comes the moment when not enough knowledge and experience to exit the relevant situation, when you will not help your repair skills, nor knowledge of the operating instructions of the vehicle, need more specific knowledge. Such a driver checking by its vehicle occurs at various breakdowns, away from the maintenance stations, somewhere on the country road. How to solve the difficult task of incorporating a transmission during clutch failure, in place breakdown, where repair is impossible? Read our instructions.

First, the explanation is based on the method of operation of the transmission with a non-working clutch. The technique is based on a decrease in the interaction between two gears having almost the same rotation speed. In this state, it is possible to switch the drive gear to the slave without harm to the transmission.

To begin with, check that there are no obstacles to the road ahead on the road. Since when starting the engine, the machine immediately starts movement. Before starting the start, make sure that the transmission lever is in the first transmission position. Then begin to increase the fuel supply, slightly pressing the gas pedal. Now the ignition is included. It will be perfect if the engine starts a jerk and go. You will be able to reach the workshop on the first gear.

Remember that the long-term movement on the first transmission leads to overheating of the engine, it can fail. It is possible to fully ride without clutch for a long time. The procedure for the following. First, wait for speed increases and the ability to turn on the second gear. Turn off the first speed and transfer the transmission lever to the neutral position. To do this, lower the gas pedal at the moment when the resistance is the smallest, switch the transfer. The following transmission is included in the same way. Acceleration and everything in a circle.

Such an order of switching speed is not too complicated. If you need to reduce the transmission stage without clutch operation, use another method. It is achieved with the help of Peregazovka. Increase the primary shaft in neutral. Then the gear shift lever smoothly translate to lower speed.

With non-working clutch, the use of rear transmission may have difficult consequences. Although there is an extreme case when it can save the situation. Similarly, the start of the car without the participation of the broken clutch can be turned on the reverse. Turn on the transmission when the engine is broken, slid a bit, then start the machine using the key. In the perfect case, the machine sharply twitches back, and the car starts.

You can ride without clutch and is not very difficult, but you need training. The main thing is to learn to understand what and how it works. It is necessary to align the angular velocities of the crankshaft and the primary shaft, the gearbox box to turn on the transmission. The clutch function is disconnected and smoothly connect. Learn to feel and compare the crankshaft speed and speed of the machine and then easily bypass without clutch.